Keys <Keys - Polycom SoundPoint IP 300 Administrator's Manual

Administrator's Guide - SoundPoint IP / SoundStation
4.6.1.16 Keys <keys/>
These settings control the scrolling behavior of keys and can be used to change key
functions.
Attribute
key.scrolling.timeout
SoundPoint
the factory defaults, although this is typically not necessary. For each key whose func-
tion you wish to change, add an XML attribute in the format described in the following
table to the <keys .../> element of the configuration file. These will override the built-
in assignments.
Remapping the arrow keys is not recommended.
In the following table, x=IP_300, IP 430, IP_500 or IP_600, y is the key number. Note
that IP_300 parameters affect SoundPoint
affect SoundPoint
and 501 phones. IP 300: y=1-35; IP 430: y=1-35; IP 500: y=1-40; IP 600: y=1-42
Attribute
key.x.y.function.prim
key.x.y.subPoint.prim
The following table lists the functions that are available:
Function
ArrowDown
ArrowLeft
ArrowRight
ArrowUp
132
Permitted
Values
positive
integer
®
IP 300, 301, 430, 500, 501 and 600 key functions can be changed from
® IP 430 phones, and IP_500 parameters affect SoundPoint
Permitted
Values
Functions listed
below.
positive integer
Function
Line1
Line2
Line3
Line4
Copyright © 2006 Polycom, Inc.
®
IP
Default Interpretation
1 The time-out after which a key that is enabled
for scrolling will go into scrolling mode until the
key is released. Keys enabled for scrolling are
menu navigation keys (left, right, up, down
arrows), volume keys, and some context-spe-
cific soft keys. The value is an integer multiple
of 500 milliseconds (1=500ms).
® IP 300 and 301 phones, IP_430 parameters
Interpretation
Sets the function for key y on platform x.
Sets the sub-identifier for key functions with a
secondary array identifier such as SpeedDial.
Optimization
® IP 500