Polycom SoundPoint IP 300 Administrator's Manual page 134

Administrator's Guide - SoundPoint IP / SoundStation
Attribute
call.lastCallReturnString
call.callsPerLineKey
call.stickyAutoLineSeize
a. The call diversion, no answer feature will take precedence over this feature if enabled. For
4.6.1.12.1 Shared Calls <shared/>
Attribute
call.shared.disableDivert
call.shared.seizeFailReorder
126
more information, refer to 4.6.2.3.3 No Answer <noanswer/> on page 155.
a
Copyright © 2006 Polycom, Inc.
®
IP
Permitted
Values Default Interpretation
string of *69 The string sent to the server when the user
maximum selects the "last call return" action.
length 32
1 to 24 OR 24 OR
For the SoundPoint
permitted range is 1 to 24 and the default
1 to 8 8
is 24. For all other phones the permitted
range is 1 to 8 and the default is 8.
This is the number of calls that may be
active or on hold per line key on the
phone.
Note that this may be overridden by the
per-registration attribute of reg.x.callsPer-
LineKey. Refer to 4.6.2.1 Registration
<reg/> on page 149.
0 or 1 0 Set to 1 to make the phone use "sticky"
line seize behavior. This will help with
features that need a second call object to
work with. The phone will attempt to ini-
tiate a new outgoing call on the same SIP
line that is currently in focus on the LCD
(this was the behavior in SIP 1.6.5).
Set to 0 means disabled (this was the
behavior in SIP 1.6.6).
Note: This may fail due to glare issues in
which case the phone may select a differ-
ent available line for the call.
Permitted
Values Default
0, 1 1
0, 1 1
®
IP 600 and 601 the
Interpretation
If set to 1, disable diversion feature for
shared lines.
If set to 1, play re-order tone locally on
shared line seize failure.
Optimization