Sound Effects <Sound_Effects - Polycom SoundPoint IP 300 Administrator's Manual

Administrator's Guide - SoundPoint
4.6.1.7 Sound Effects <sound_effects/>
The phone uses both synthesized (based on the chord-sets described earlier) and sam-
pled audio sound effects. Sound effects are defined by patterns: rudimentary
sequences of chord-sets, silence periods, and wave files.
Attribute
se.stutterOnVoiceMail
se.appLocalEnabled
4.6.1.7.1 Patterns <patterns/>
Patterns use a simple script language that allows different chord sets or wave files to
be strung together with periods of silence. The script language uses the following
instructions:
Instruction
sampled (n)
chord (n, d)
silence (d)
® ®
IP / SoundStation
Permitted
Values Default
0, 1 1
0, 1 1
Meaning Example
Play sampled audio se.pat.callProg.x.inst.y.type ="sampled" (sampled audio
a file instruction type)
file n
se.pat.callProg.x.inst.y.value ="3" (specifies sampled
audio file 3)
Play chord set n (d is se.pat.callProg.x.inst.y.type = "chord" (chord set
optional and allows instruction type)
the chord set ON
se.pat.callProg.x.inst.y.value = "3" (specifies call
duration to be over-
progress chord set 3)
ridden to d millisec-
onds) se.pat.callProg.x.inst.y.param = "2000" (override ON
duration of chord set to 2000 milliseconds)
Play silence for d se.pat.callProg.x.inst.y.type = "silence" (silence instruc-
milliseconds (Rx tion type)
audio is not muted)
se.pat.callProg.x.inst.y.value = "300" (specifies silence
is to last 300 milliseconds)
Copyright © 2006 Polycom, Inc.
IP
Interpretation
If set to 1, stuttered dial tone is used in place
of normal dial tone to indicate that one or
more messages (voice mail) are waiting at
the message center.
If set to 1, local user interface sound effects
such as confirmation/error tones, will be
enabled.
Optimization
103