Polycom SoundPoint IP 300 Administrator's Manual page 97

Administrator's Guide - SoundPoint
Attribute
voIpProt.SIP.ms-forking
voIpProt.SIP.dialog.usePvalue
voIpProt.SIP.connection-
Reuse.useAlias
voIpProt.SIP.sendCompactHdrs
voIpProt.SIP.keepalive.session-
Timers
voIpProt.SIP.request-
URI.E164.addGlobalPrefix
® ®
IP / SoundStation IP
Permitted
Values
0, 1
0, 1
0, 1
0, 1
0, 1
0, 1
Copyright © 2006 Polycom, Inc.
Default Interpretation
0 If set to 0, support for MS-forking is
disabled. If set to 1, support for MS-
forking is enabled and the phone will
reject all Instant Message INVITEs.
This parameter is relevant for
®
Microsoft Office Live Communica-
tions Server 2005 server installations.
Note that if any end point registered to
the same account has MS-forking dis-
abled, all other end points default back
to non-forking mode. Windows
senger does not use MS-forking so be
aware of this behavior if one of the end
points is Windows
0 If set to 0, phone uses "pval" field
name in Dialog. This obeys the draft-
ietf-sipping-dialog-package-06.txt
draft. If set to 1, phone uses a field
name of "pvalue".
0 If set to 0, shows old behavior.
If set to 1, phone uses the connection
reuse draft which introduces "alias".
0 If set to 0, SIP header names generated
by the phone use the long form, for
example 'From'.
If set to 1, SIP header names generated
by the phone use the short form, for
example 'f'.
0 If set to 1, the session timer will be
enabled.
If set to 0, the session timer will be dis-
abled, and the phone will not declare
"timer" in "Support" header in
INVITE. The phone will still respond
to a re-INVITE or UPDATE. The
phone will not try to re-INVITE or do
UPDATE even if remote end point asks
for it.
0 If set to 1, '+' global prefix is added to
E.164 user parts in sip: URIs:.
Optimization
®
Mes-
®
Messenger.
89