Polycom SoundPoint IP 300 Administrator's Manual page 58

Administrator's Guide - SoundPoint
until a successful SNTP response is received to indicate that they are not accurate. The
time and date display can use one of several different formats and can be turned off.
Central
(boot
server)
Local
50
® ®
IP / SoundStation IP
Configuration file:
sip.cfg
Web Server
(if enabled)
Local Phone User
Interface
Copyright © 2006 Polycom, Inc.
Turn time and date display on or off.
• For more information, refer to 4.6.1.4 User Prefer-
ences <user_preferences/> on page 98.
Set the time and date display formats.
• For more information, refer to 4.6.1.3.2 Date and
Time <datetime/> on page 97.
Set the basic SNTP settings and daylight savings param-
eters.
• For more information, refer to 4.6.1.10.2 Time Syn-
chronization <SNTP/> on page 121.
Set the basic SNTP and daylight savings settings.
Navigate to: http://<phoneIPAddress>/coreConf.htm#ti
Changes are saved to local flash and backed up to
<Ethernet address>-phone.cfg on the boot server. They
will permanently override global settings unless deleted
through the Reset Local Config menu selection.
The basic SNTP settings can be made in the Network
Configuration menu.
• For more information, refer to 2.2.1.1 DHCP or
Manual TCP/IP Setup on page 5.
The user can edit the time and date format and enable or
disable the time and date display under the Settings
menu.
Changes are saved to local flash and backed up to
<Ethernet address>-phone.cfg on the boot server. They
will permanently override global settings unless deleted
through the Reset Local Config menu selection.
Features