Polycom SoundPoint IP 300 Administrator's Manual page 127

Administrator's Guide - SoundPoint
4.6.1.9.1.2 Call Control <CallControl/>
These parameters apply to call control packets, such as the network protocol signaling.
Attribute
qos.ethernet.callControl.user_priority
4.6.1.9.1.3 Other <Other/>
These default parameter values are used for all packets which are not set explicitly.
Attribute
qos.ethernet.other.user_priority
4.6.1.9.2 IP TOS <IP/>
These settings control the "type of service" field in outgoing packets.
4.6.1.9.2.1 RTP <RTP/>
These parameters apply to RTP packets.
Attribute
qos.ip.rtp.dscp
qos.ip.rtp.min_delay
® ®
IP / SoundStation IP
Permitted
Values
0-7
Permitted
Values
0-7
Permitted
Values
0 to 63 or
EF or
any of
AF11,AF12,
AF13,AF21,
AF22,AF23,
AF31,AF32,
AF33,AF41,
AF42,AF43
0, 1
Copyright © 2006 Polycom, Inc.
Default Interpretation
5 User-priority used for call con-
trol packets.
Default Interpretation
2 User-priority used for packets that
do not have a per-protocol setting.
Default Interpretation
Null The differentiated services
codepoints of packets.
If set to null, the values below
of min_delay,
max_throughput,
max_reliability, min_cost, and
precedence are used. Other-
wise, these values are overrid-
den.
1 If set to 1, set min-delay bit in
the IP TOS field of the IP
header, or else don't set it.
Optimization
119