Custom Certificates; Incoming Signaling Validation - Polycom SoundPoint IP 300 Administrator's Manual

Administrator's Guide - SoundPoint
Local

3.8.2 Custom Certificates

When trying to establish a connection to a boot server for application provisioning, the
phone trusts certificates issued by widely recognized certificate authorities. Refer to
6.1 Trusted Certificate Authority List on page 173. In addition, custom certificates can
be added to the phone. This is done by using the SSL Security menu on the phone to
provide the URL of the custom certificate then select an option to use this custom cer-
tificate.
Central
(boot
server)
Local

3.8.3 Incoming Signaling Validation

Three optional levels of security are provided for validating incoming network signal-
ing:
• source IP address validation
• digest authentication
• both
Central
(boot
server)
74
® ®
IP / SoundStation IP
Web Server None.
(if enabled)
Local Phone User The user and administrator passwords can be changed under
Interface the Settings menu or through configuration parameters (see
2.2.2.1.1.3 Setting Flash Parameters from Configuration
Files on page 16). Passwords can consist of ASCII charac-
ters 32-127 (0x20-0x7F) only.
Changes are saved to local flash but are not backed up to
<Ethernet address>-phone.cfg on the boot server for secu-
rity reasons.
Configuration file: None.
Web Server None.
(if enabled)
Local Phone User The custom certificate can be specified and the type of cer-
Interface tificate to trust can be set under the Settings menu.
Configuration File: Specify the type of validation to perform on a request-by-
sip.cfg request basis, appropriate to specific event types in some
cases.
•
Copyright © 2006 Polycom, Inc.
For more information, refer to 4.6.1.1.4.3 Request Vali-
dation <requestValidation/> on page 92.
Features