Reset To Factory Defaults - Polycom SoundPoint IP 300 Administrator's Manual

Administrator's Guide - SoundPoint
Name
Provisioning
String
a. The server user name and password should be changed from the default values. Note that
b. Not available on SoundPoint
2.2.1.3.4 Ethernet Menu
Name
CDP
VLAN ID
LAN
a
PC
a. Only available on SoundPoint

2.2.1.4 Reset to Factory Defaults

The basic network configuration referred to in the preceding sections can be reset to
factory defaults.
To perform this function, do one of the following during the countdown process in the
bootROM:
• On all phones except the IP 430 and 4000, simultaneously press and hold the 4,
• On the IP 430, simultaneously press and hold the 1, 3, 5 and 7 dial pad keys
• On the IP 4000, simultaneously press and hold the 6, 8 and * dial pad keys until
Enter the administrator password to initiate the reset. Resetting to factory defaults will
also reset the administrator password (factory default password is 456).
12
®
IP / SoundStation
Possible Values
any string
b
for insecure protocols the user chosen should have very few privileges on the server.
Possible Values
Enabled, Disabled
Null, 0 through 4094
a Auto, 10HD, 10FD,
100HD, 100FD
Auto, 10HD, 10FD,
100HD, 100FD
means full duplex.
6, 8 and * dial pad keys until the password prompt appears.
until the password prompt appears.
the password prompt appears.
Copyright © 2006 Polycom, Inc.
®
IP
Description
The URL used in XML post/response transac-
tions. If empty, the configured URL is used.
This field is disabled when Provisioning Method
is Default.
® ®
IP 300 and SoundPoint
Description
If enabled, the phone will use CDP. It also reports
power usage to the switch.
Phone's 802.1Q VLAN identifier.
Note: Null = no VLAN tagging
The network speed over the Ethernet.
The default value is Auto.
The network speed over the Ethernet.
The default value is Auto.
®
IP 430 and 601 phones. HD means half duplex and FD
Installation and Operation
IP 500 phones.