Messaging <Msg - Polycom SoundPoint IP 300 Administrator's Manual

Administrator's Guide - SoundPoint
4.6.2.5 Messaging <msg/>
Message-waiting indication is supported on a per-registration basis.
Attribute
msg.bypassInstantMessage
4.6.2.5.1 Message Waiting Indicator
In the following table, x is the registration number. IP 300, 301, and 430: x=1-2; IP
500 and 501: x=1-3; IP 600: x=1-6; IP 601: x=1-12; IP 4000: x=1.
Attribute
msg.mwi.x.sub-
scribe
msg.mwi.x.call-
BackMode
msg.mwi.x.callBack
® ®
IP / SoundStation IP
Permitted
Values Default
0, 1 0
Permitted Values
ASCII encoded string con-
taining digits (the user part
of a SIP URL) or a string
that constitutes a valid SIP
URL (6416 or 6416@poly-
com.com)
contact or
registration or
disabled
ASCII encoded string con-
taining digits (the user part
of a SIP URL) or a string
that constitutes a valid SIP
URL (6416 or 6416@poly-
com.com)
Copyright © 2006 Polycom, Inc.
Interpretation
If set to 1, the display offering a choice
of "Message Center" and "Instant Mes-
sages" will be bypassed when pressing
the Messages key. The phone will act as
if "Message Center" was chosen. Refer
to 3.6.1 Voice Mail Integration on
page 64. Instant Messages will still be
accessible from the Main Menu.
<mwi/>
Default Interpretation
Null If non-Null, the phone will
send a SUBSCRIBE
request to this contact after
boot-up.
"disabled" If set to "contact", a call
will be placed to the contact
specified in the callback
attribute when the user
invokes message retrieval.
If set to "registration", a
call will be placed using
this registration to the con-
tact registered (the phone
will call itself).
If set to "disabled", mes-
sage retrieval is disabled.
Null Contact to call when
retrieving messages for this
registration.
Optimization
159