Polycom SoundPoint IP 300 Configuration
For quadro 3.0.x images
Hide thumbs
Also See for SoundPoint IP 300:
- Administrator's manual (188 pages) ,
- Release note (31 pages) ,
- User manual (30 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Polycom SoundPoint IP 300
Summary of Contents for Polycom SoundPoint IP 300
- Page 1 Polycom SoundPoint IP 300 Phone Configuration Polycom SoundPoint IP 300 Phone Configuration for Quadro 3.0.x Images Abstract: This document presents step-by-step how to configure the Polycom Phone to work together with Quadro. Copyright © 2004 Epygi Technologies, Ltd. All rights reserved.
-
Page 2: Table Of Contents
Quadro Board Configuration ................3 SIP Phone Configuration..................3 Automatic Configuration of the Polycom SoundPoint IP 300 .........3 Manual Configuration of the Polycom SoundPoint IP 300 using a DHCP Server....4 Configuration by the End User.................4 Configuring the IP Lines ..................5... -
Page 3: Quadro Board Configuration
IP lines to routing mode only. Epygi or the other company (wholesaler, retailer) has to set up the configuration place and enter the default values into the phone. The Polycom SoundPoint IP300 phone can be configured completely manually or in an automated way (over TFTP). -
Page 4: Manual Configuration Of The Polycom Soundpoint Ip 300 Using A Dhcp Server
“Menu”, then select “System Status”, press “Select”, “General” “Select” and the current IP address of the phone will be displayed. Use a HTTP web browser, connect to the “Polycom” IP address (Note here that a HTTP server boots slowly, so it is necessary to wait about 1 minute). -
Page 5: Configuring The Ip Lines
Polycom SoundPoint IP 300 Phone Configuration 2.4 Configuring the IP Lines The IP Lines Settings page can be found under the Telephony menu, menu item Line Settings. The IP Lines Settings page lists all IP lines of the Quadro with additional...