Indicators <Indicators - Polycom SoundPoint IP 300 Administrator's Manual

Administrator's Guide - SoundPoint IP / SoundStation
SoundPoint
and 601 phones.
Attribute
bitmap.x.y.name
4.6.1.18 Indicators <indicators/>
Indicators (graphic icons, animations, and LED patterns) used by the phone are
defined in this section.
Attribute
ind.idleDisplay.enabled
4.6.1.18.1 Animations <Animations/> <IP_300/>, <IP_400/>,
<IP_500/>, <IP_600/> and <IP_4000/>
This section defines bitmap animations composed of bitmap/duration couples. In the
following table, x=IP_300, IP_400, IP_500, IP_600 or IP_4000, y is the animation
number, z is the step in the animation. Note that IP_300 parameters affect SoundPoint
IP 300 and 301 phones, IP_400 parameters affect SoundPoint
parameters affect SoundPoint
SoundPoint
Attribute
ind.anim.x.y.frame.z.bitmap
134
® IP 500 and 501 phones and IP_600 parameters affect SoundPoint
Permitted Values
The name of a bit-
map to be used.
Permitted
Values
0, 1
® IP 500 and 501 phones and IP_600 parameters affect
® IP 600 and 601 phones.
Permitted Values
A bitmap name
defined previously.
Copyright © 2006 Polycom, Inc.
®
IP
Interpretation
This is the name of a bitmap to be used for creating an
animation. If the bitmap is to be downloaded from the
boot server, its name must:
1. Be different from any name already in use in
sip.cfg.
2. Match the name of the corresponding <file-
Name>.bmp to be retrieved from the boot server.
Default Interpretation
0 If set to 1, the idle display may support pre-
sentation of a custom animation if config-
ured properly in the animation section of
sip.cfg.
Interpretation
Bitmap to use.
Note that it must be defined already, refer
to 4.6.1.17.1 Platform <IP_300/>,
<IP_400/>, <IP_500/>, <IP_600/> and
<IP_4000/> on page 133.
Optimization
® IP 600
® IP 430 phones, IP_500
®