Protocol <Volpprot - Polycom SoundPoint IP 300 Administrator's Manual

Administrator's Guide - SoundPoint
4.6.1.1 Protocol <volpProt/>
4.6.1.1.1 Local <local/>
Attribute
volpProt.local.port
4.6.1.1.2 Server <server/>
Attribute
voIpProt.server.dhcp.available
voIpProt.server.dhcp.option
voIpProt.server.dhcp.type
® ®
IP / SoundStation IP
Permitted
Values Default Interpretation
0 to 65535 5060 Local port for sending and receiving SIP signaling
packets.
If set to 0 or Null, 5060 is used for the local port but
it is not advertised in the SIP signaling.
If set to some other value, that value is used for the
local port and it is advertised in the SIP signaling.
Permitted
Values
0, 1
128 to 255
0, 1
Copyright © 2006 Polycom, Inc.
Default Interpretation
0 If set to 1, check with the
DHCP server for SIP server IP
address. If set to 0, do not
check with DHCP server.
Option to request from the
DHCP server if voIp-
Prot.server.dhcp.available = 1.
There is no default value for
this parameter, it must be filled
in with a valid value.
If set to 0, IP request address.
If set to 1, request string.
Type to request from the
DHCP server if voIp-
Prot.server.dhcp.available = 1.
There is no default value for
this parameter, it must be filled
in with a valid value.
Optimization
85