Security <Security - Polycom SoundPoint IP 300 Administrator's Manual

Administrator's Guide - SoundPoint IP / SoundStation
4.6.1.19.2 Scheduled Logging Parameters <scheduled/>
The phone can be configured to schedule certain advanced logging tasks on a periodic
basis. These attributes should be set in consultation with Polycom. Each scheduled log
task is controlled by a unique attribute set starting with log.sched.x where x identifies
the task.
Attribute
log.sched.x.name
log.sched.x.level
log.sched.x.period
log.sched.x.startMode
log.sched.x.startTime
log.sched.x.startDay
4.6.1.20 Security <security/>
These settings affect security aspects of the phone.
Attribute
sec.tagSerialNo
140
®
IP
Permitted
Values Interpretation
alphanu- Name of an internal system command to be periodically
meric string executed. To be supplied by Polycom.
0-5 Event class to assign to the log events generated by this
command. This needs to be the same or higher than
log.level.change.slog for these events to appear in the log.
positive Seconds between each command execution. 0=run once
integer
abs, rel Start at absolute time or relative to boot.
positive Seconds since boot when startMode is rel or the start time
integer OR in 24-hour clock format when startMode is abs.
hh:mm
1-7 When startMode is abs, specifies the day of the week to
start command execution. 1=Sun, 2=Mon, ..., 7=Sat
Permitted
Values Default
0, 1 0
Copyright © 2006 Polycom, Inc.
Interpretation
If set to 1, the phone may advertise its serial num-
ber (Ethernet address) through protocol signaling.
Optimization