Distinctive Call Waiting; Do-Not-Disturb - Polycom SoundPoint IP 300 Administrator's Manual

Administrator's Guide - SoundPoint
Local

3.1.14 Distinctive Call Waiting

The SIP Alert-Info field can be used to map calls to distinct call waiting types, cur-
rently limited to two styles.
Central
(boot
server)
Local

3.1.15 Do-Not-Disturb

A do-not-disturb feature is available to temporarily stop all incoming call alerting.
Calls can optionally be treated as though the phone is busy while Do-Not-Disturb
(DND) is enabled. Incoming calls received while DND is enabled are logged as
missed. For more information on forwarding calls while DND is enabled, refer to 3.2.5
Call Diversion (Call Forward) on page 54.
Central
(boot
server)
36
® ®
IP / SoundStation IP
Web Server None.
(if enabled)
Local Phone User The user can edit the ring types selected for each line
Interface under the Settings menu. The user can also edit the
directory contents.
Changes are saved to local flash and backed up to
<Ethernet address>-phone.cfg on the boot server. These
changes will permanently override global settings unless
deleted through the Reset Local Config menu selection.
Configuration file: Specify the mapping of Alert-Info strings to call waiting
sip.cfg types.
•
Web Server None.
(if enabled)
Local Phone User None.
Interface
Configuration file: Specify whether or not DND results in incoming calls
sip.cfg being given busy treatment.
•
Configuration file: Specify whether DND is treated as a per-registration fea-
phone1.cfg ture or a global feature on the phone.
•
Copyright © 2006 Polycom, Inc.
For more information, refer to 4.6.1.1.4.2 Alert
Information <alertInfo/> on page 91.
For more information, refer to 4.6.1.12 Call Han-
dling Configuration <call/> on page 125.
For more information, refer to 4.6.2.2.1 Do Not Dis-
turb <donotdisturb/> on page 153.
Features