Table of Contents
Advertisement
2.5 Making Call Features
2.5 Making Call Features
2.5.1 Predialling
Description
A display PT user can check and correct the entered number before it is dialled, while on-hook. The call will
be initiated after going off-hook.
Conditions
•
Storing the Predialled Number in the Personal Speed Dialling
The predialled number can be stored in the Personal Speed Dialling by pressing the AUTO DIAL/STORE
button. (→ 2.6.4 Speed Dialling—Personal/System) In this case, the extension will enter into the personal
programming mode automatically so that a name can be assigned for the stored number.
Operating Manual References
3.1.2 Settings on the Programming Mode
2.5.2 Automatic Extension Release
Description
After going off-hook, if an extension user fails to dial any digits within a preprogrammed time period, the user
will hear a reorder tone. This operation applies to intercom calls only. This feature is also known as
Automatic Station Release.
Conditions
•
A PT/PS user hears a reorder tone for a preprogrammed time period, and then the PT/PS returns to idle
status automatically. However, an SLT user hears a reorder tone until he goes on-hook.
•
This feature works in one of the following cases:
When making an intercom call
a.
If the first digit is not dialled within a preprogrammed time period.
b.
After a digit is dialled, if subsequent digits are not dialled within a preprogrammed time period.
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone
→ Dial—Extension First Digit
→ Dial—Extension Inter-digit
→ Tone Length—Reorder Tone for PT Handset
→ Tone Length—Reorder Tone for PT Hands-free
2.5.3 Intercom Call
Description
An extension user can call another extension user.
Conditions
•
Extension Number/Name Assignment
Extension numbers and names are assigned to all extensions. The assigned number and name are
shown on display PTs during intercom calls.
84
Feature Manual
Advertisement
Table of Contents
