Table of Contents
Advertisement
2.21 Proprietary Telephone (PT) Hardware Features
2.21.1 Fixed Buttons
Description
PTs, DSS Consoles, and Add-on Key Modules are provided with the following feature/Line Access buttons:
Depending on your device type, some buttons may not be provided.
As for buttons on PSs, please refer to the Operating Instructions for each PS.
[PT and Add-on Key Module]
Navigator Key, Jog
Dial, Volume Key
ENTER
CANCEL
PROGRAM
FLASH/RECALL
HOLD
SP-PHONE
(Speakerphone)
MONITOR
Button
2.21 Proprietary Telephone (PT) Hardware Features
Used to adjust the ringer, speaker, handset and
headset volume and the display contrast. Navigator
Key and Jog Dial can also be used to select data from
the Call Directory and the System Feature Access
Menu on the display.
Used to confirm the selected item.
Used to cancel the selected item.
Used to enter and exit the programming mode.
Used to disconnect the current call and make another
call without hanging up (Flash/Recall mode or
Terminate mode) or used to send a flash/recall signal
to the telephone company or host PBX to access their
features (External Feature Access mode). This button
can also be used as a CANCEL button while on-hook.
Used to place a call on hold.
Used for hands-free operation. Also used to switch
between handset and hands-free operation.
Used for a hands-free dialling. Also used to monitor
the party's voice in hands-free mode.
Usage
Feature Manual
197
Advertisement
Table of Contents
