Table of Contents
Advertisement
5.5.2 PT Programming
Description
A PT user can perform the following programming:
a.
Personal Programming: Customising the extension according to his needs.
b.
Manager Programming: Customising specified frequently changing items (e.g., Charge Management
and Remote Extension Dial Lock).
Conditions
•
COS programming determines whether personal programming can be performed.
•
The extension(s) assigned as the manager COS can perform manager programming.
•
During programming, the PT is considered to be busy.
•
Only one manager programmer is allowed to perform manager programming at one time. The maximum
number of simultaneous programmers that each PBX supports is as follows:
–
one manager programmer + 127 personal programmers
–
128 personal programmers
•
Personal Programming Data Default Set
A user can return the items programmed on the telephone to default.
PC Programming Manual References
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—Manager—PT Programming
Mode
19.1 PBX Configuration—[11-1] Maintenance—Main—Password—Manager Password - PT Programming—
Prog *1
Feature Manual References
5.1.1 Class of Service (COS)
5.1.6 Manager Features
6.1 Capacity of System Resources
Operating Manual References
1.9.12 Clearing Features Set at Your Extension (Extension Feature Clear)
3.1 Customising Your Phone (Personal Programming)
4.1 Manager Programming
5.5.3 DSP Resource Usage
Description
To digitally process audio signals, such as a telephone call, the PBX must use a certain number of DSP
(Digital Signal Processing) resources. DSP resources are provided by the DSP cards installed in the PBX.
Since there are a limited number of DSP resources, no further operations (e.g., telephone calls, playing an
OGM) can be performed if all resources are being used.
The following list shows some of the basic operations that require DSP resources.
•
IP extension call
•
IP trunk call
•
Conference
5.5.2 PT Programming
Feature Manual
415
Advertisement
Table of Contents
