Table of Contents
Advertisement
2.11.4 Headset Operation
Description
This PBX allows the use of headset-compatible PTs. A PT user can talk to another party without lifting the
handset. This feature is also known as Handset/Headset Selection.
For connection and operation, refer to the Operating Instructions for the headset.
Conditions
•
Hardware Requirement: An optional headset
•
If headset mode is on, pressing the SP-PHONE button activates the headset, not the built-in speaker.
•
To set headset mode on a DPT or IP-PT, use personal programming (Headset Operation) or press the
Headset button. To set headset mode on an APT, use the handset/headset selector provided on the set
and/or on the headset.
•
Headset Button
A flexible button on a DPT or IP-PT can be customised as a Headset button. It is possible to assign a
Headset button to a flexible button on an APT, but the button will not function.
•
Answer/Release Button
A flexible button can be customised as an Answer button or a Release button. Such buttons are useful for
headset operation. It is possible to answer an incoming call by pressing an Answer button. While hearing
the Call Waiting tone during a conversation, pressing an Answer button enables one to answer the
second call by placing the current call on hold. Pressing a Release button enables one to disconnect the
line during or after conversation, or to complete a Call Transfer.
•
It is possible to switch from headset mode to hands-free mode or vice versa during a conversation by
pressing the Headset button.
•
Headset users cannot use the following features:
–
Automatic Redial (→ 2.6.3 Last Number Redial)
–
Receiving OHCA (DPT through a stacking connection only [→ 5.3.1 Stacking Connection])
–
Receiving Whisper OHCA (→ 2.10.4.4 Whisper OHCA)
PC Programming Manual References
8.3.1 Users—User's Flexible Button—Wired Extension—Type
Feature Manual References
2.21.2 Flexible Buttons
Operating Manual References
1.4.8 Using the Headset (Headset Operation)
3.1.2 Settings on the Programming Mode
2.11.5 Data Line Security
Description
Setting Data Line Security at an extension protects communications between the extension and the other
party from being interrupted by signals such as Call Waiting, Hold Recall and Executive Busy Override. An
extension that is using a connected data device (e.g., a fax machine) can set this feature to maintain secure
data transmission by preventing tones or interruptions from other extensions during communication.
2.11.4 Headset Operation
Feature Manual
139
Advertisement
Table of Contents
