Panasonic FP Web-Server User Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Server
  5. FP Web-Server
  6. User manual

Panasonic FP Web-Server User Manual

Fp series programmable controller, hardware / configuration
Hide thumbs Also See for FP Web-Server:
Table of Contents

Advertisement

Quick Links

Programmable Controller
FP Web-Server
Hardware / Configurator

Advertisement

Table of Contents
loading

Related Manuals for Panasonic FP Web-Server

Summary of Contents for Panasonic FP Web-Server

  • Page 1 Programmable Controller FP Web-Server Hardware / Configurator...

  • Page 2: Limited Warranty

    This manual and everything described in it are copyrighted. You may not copy this manual, in whole or part, without written consent of Panasonic Electric Works Europe AG (PEWEU). PEWEU pursues a policy of continuous improvement of the design and performance of its products, therefore, we reserve the right to change the manual/product without notice.
  • Page 4 Important Symbols One or more of the following symbols may be used in this manual: Warning. The warning triangle indicates especially important safety instructions. If they are not adhered to, the results could be: • fatal or critical injury and/or •...
  • Page 5 Summarizes key points in a concise manner. Provides helpful keyboard shortcuts. Provides brief explanation of a function, e.g. why or when you should use it. next page Indicates that the text will be continued on the next page. The manual uses the following conventions to indicate elements from the user interface or the keyboard: "Data Field"...

  • Page 6: Table Of Contents

    BEFORE YOU START ................2 Product Numbers and Versions..............3 New in This Version................... 4 System Requirements ................6 Advantages and Functions of the FP Web-Server ........7 FP Web-Server Block Diagram..............10 System Sample Network ................. 11 Hardware Description............13 Introduction ....................
  • Page 7 Installation of the Configurator Program...........35 Determination of the IP Configuration ............36 Generate a New Configurator Project ............37 Transfer a Configurator Project to the FP Web-Server ......39 Internet Browser to Test the FP Web-Server ...........41 Further Information...................43 Configurator Software ............45 General Information on the FP Web-Server Configurator ......46...
  • Page 8 How to Find out the Address of the Email Server ........66 Email Configurator Input Fields ............... 68 Http Server Functions/ Web Pages ........69 Details on the FP Web-Server's Web Page Functions ......70 7.1.1 Testing the FP Web-Server Functions............. 70 7.1.2...
  • Page 9 TCP/ IP Network Installation of a Windows Client .........110 9.1.2 Modem and Dial-up Networking Installation of a Windows Client..111 9.1.3 Setup of the Modem Connected to the FP Web-Server for PPP-Communication ................118 9.1.4 FP Web-Server PPP Gateway Functions ..........119 9.1.5 FPWIN Pro Setup to Use the Remote Dialup Network ......122...
  • Page 10 13.3 IEC 60870 Library for Control FPWIN Pro..........156 14. Java Applet Library "MEW.JAR" ........157 14.1 Introduction to FP Web-Server and the Java Applet "MEW.JAR" ..158 15. Additional Information ............159 15.1 Contents of the CD and Auxiliary Programs .......... 160 15.2 Description of the HTML Examples ............

  • Page 12: Getting Started

    Chapter 1 Getting Started...

  • Page 13: Before You Start

    Word, Frontpage (delivered with MS Office), Netscape Composer (delivered with Netscape Navigator) et.al. can serve as editors for creating HTML files. • The created HTML file will be saved on the FP Web-Server with the help of the Configurator. •...

  • Page 14: Product Numbers And Versions

    1.2 Product Numbers and Versions FP Web-Server V2.11 1.2 Product Numbers and Versions Item Product name Part number FP Web-Server (Hardware) FP WEB-SERVER UNIT FP-WEB (Japan: AFP0610) FP WEB-SERVER2 UNIT FP-WEB2 (Japan: AFP0611) Configurator Software FP WEB Configurator Tool Ver.2.11...

  • Page 15: New In This Version

    Type Description Updated - The FP Web-Server can now also log in on email servers which require ESMTP feature authentication. For detailed information, please refer to Email Server Settings. - When sending an email, the FP Web-Server can now automatically insert a TO and FROM tag line before the email text.
  • Page 16 - System, hidden and scc files are ignored by the Web file functions The 'old' FP Web-Server Internet demo unit (http://62.180.233.51/) has been switched off. The two new FP Web-Server Internet demo units can now be accessed, also by name: - Internet demo unit 1: http://fpwebdemo1.eu/ (or http://62.134.44.202/)

  • Page 17: System Requirements

    FP Web-Server V2.11 Getting Started 1.4 System Requirements The FP Web-Configurator Tool has the following system requirements: • MS Windows NT/ XP/ 2000 (or 95/ 98/ ME) • Hard disk with at least 10 MB free disk space • Color or monochrome monitor •...

  • Page 18: Advantages And Functions Of The Fp Web-Server

    FP Web-Server V2.11 1.5 Advantages and Functions of the FP Web-Server The multifunctional FP Web-Server unit allows you to access FP Series PLCs via Ethernet networks (Intranet and Internet) for data exchange. Access can be carried out by a computer and a standard browser, such as MS Internet Explorer or Netscape Navigator, by specifying the target unit's IP address, which can be changed.
  • Page 19 Getting Started FP Web-Server Functions: The FP Web-Server works as an interface between a LAN or a WAN network (Internet/ Intranet) and all PLCs of the FP Series. The following main features are supported: RS232C/ Ethernet Interface (see page 104): •...
  • Page 20 Configurator Software (see page 45) A Windows program is supplied to make the configuration and the setup of the FP Web-Server easy. This configuration program is called "Control FP WEB Configurator Tool". It helps the user to quickly set up and change the following items, e.g.: •...

  • Page 21: Fp Web-Server Block Diagram

    FP Web-Server V2.11 Getting Started 1.6 FP Web-Server Block Diagram...

  • Page 22: System Sample Network

    1.7 System Sample Network FP Web-Server V2.11 1.7 System Sample Network Any combinations of the LAN and the dial-up functions are possible, e.g. an Ethernet network connecting several FP Web-Servers with one FP Web-Server set up as a gateway for the dial-up connections.

  • Page 24: Hardware Description

    Chapter 2 Hardware Description...

  • Page 25: Introduction

    The FP Web-Server allows you to connect the Panasonic FP Series PLCs to an Ethernet Network (LAN). The FP Web-Server works as an Interface between a LAN or a WAN network (Internet/ Intranet) and all PLCs of the FP Series.

  • Page 26: Hardware Version

    The latest hardware version is 1.3 (available since the beginning of 2006). It is identical to hardware version 1.2 but with the Panasonic Logo and RoHS conformity. Model 2: "FP Web-Server2" Unit (FP-WEB2) Version 1.0 of this new hardware model will be available at the end of 2006.

  • Page 27: Fp Web-Server Unit Package

    • Phoenix 3-pin screw terminal Comments: • The FP Web-Server network will be configured via the Control FP WEB Configurator Tool. • The Control FP WEB Configurator Tool can be purchased separately. • For creating HTML pages a standard HTML editor (not supplied with the Configurator) is...

  • Page 28: Parts And Functions

    2.4 Parts and Functions FP Web-Server V2.11 2.4 Parts and Functions Below are two illustrations of the FP Web-Server's parts and their functions: FP Web-Server FP0 CPU Ethernet RS232C 25.0 60.0 Ethernet (RJ45) RS232C (without handshake) 2nd RS232C (Sub-D 9 pin male)
  • Page 29 • Use standard serial computer cables. a) Connects to modem (PPP) or b) Transparent communication with 2 PLC, computer, panel, etc. 24V DC use Panasonic power cable • brown = +24V DC • blue = GND • green = framing ground...

  • Page 30: Technical Data

    2.5 Technical Data FP Web-Server V2.11 2.5 Technical Data Feature Description: Type 1 Type 2 Product number PN Hardware: FP-WEB PN Hardware: FP-WEB2 FP Web-Server: PN Configurator: FPWEBTOOL2 PLC connection PLC COM: RS232C via 3-pin screw terminal port Plug: Phoenix product:...

  • Page 31: Installation

    5. Configuration: For the first configuration and how to get started with the Configurator please refer to First Steps (see page 31) This is a brief description on how to put an FP Web-Server into operation. For a detailed description please also refer to First Steps (see page 31).

  • Page 32: Important Notes

    Please also see the installation sheet "FPWEB_Server_Leaflet" supplied with your FP Web-Server for important notes, cables and installation. Please read the following notes carefully before installing your FP Web-Server. 1. Avoid installing the unit in the following locations: - Ambient temperatures outside the range of 0°C to 55°C/32°F to 131°F...
  • Page 33 FP Web-Server V2.11 Hardware Description - Do not install the unit above devices which generate heat, such as heaters, transformers or large scale resistors. 4. Installation space: - Leave at least 50mm/1.97in. of space between the wiring ducts of the unit and...
  • Page 34 FP Web-Server unit. - Keep the first 100mm/3.937in. from the front surface of the FP Web-Server unit open in order to allow room for programming tool connections and wiring.

  • Page 35: Mechanical Installation

    However you need not necessarily connect the FP Web-Server in this way. Note: Make sure that the FP Web-Server is the last unit attached. Otherwise the CPU cannot communicate with the expansion units.
  • Page 36 • The FP Web-Server unit enables a one-touch attachment to DIN rails. 1. Fit the upper hook of the FP Web-Server onto the DIN rail 2. Without moving the upper hook, press on the lower hook to fit the FP...
  • Page 37 Use M4 size pan-head screws for attachment of FP0 slim type mounting plate (AFP0803) to mounting panel. 1. Fit the upper hook of the FP Web-Server onto the FP0 slim type mounting plate 2. Without moving the upper hook, press on the lower hook to fit the FP...
  • Page 38 2.8 Mechanical Installation FP Web-Server V2.11 Example: Two Expansion Units e) Installation Using FP0 Flat Type Mounting Plate • Use M4 size pan-head screws to attach FP0 flat type mounting plate (AFP0804) and install according to the dimensions shown below.
  • Page 39 3. Align the expansion hooks with the plate and press the hooks back down FP0 flat type mounting plate An FP Web-Server with an attached FP0 flat type mounting plate can also be installed sideways on a DIN rail. DIN rail...

  • Page 40: Connecting The Power Supply

    FP Web-Server V2.11 2.9 Connecting the Power Supply The FP Web-Server unit will turn ON as soon as the power supply has been connected. 1. When connecting the power supply (class 2 circuit) make sure the polarity (+/-) is correct.

  • Page 42: First Steps

    Chapter 3 First Steps...

  • Page 43: Generalities On How To Get Started

    First Steps 3.1 Generalities on How to Get Started For an initial demo of the FP Web-Server's http function, you can access the Panasonic Internet demo unit. To carry out the test, you need an Internet browser. Please enter the following address: "http://62.134.44.202/" (second demo unit: http://62.134.44.204/)

  • Page 44: The Ethernet Network

    Web-Server can be connected to an existing Ethernet network. It is also possible to set up a separate network for the FP Web-Server. The computer can also be directly connected to the FP Web-Server by using a special "cross-over" Ethernet cable (see...

  • Page 45: Connection Of The Fp Web-Server

    First Steps 3.3 Connection of the FP Web-Server For an initial function test (without the PLC data), the FP Web-Server has to be connected to the Ethernet and be supplied with operating voltage (24V DC and FG). In the second step, the FP Web-Server has to be connected to the PLC (via RS232C). The RS232C setting of the PLC must correspond to that of the FP Web-Server.

  • Page 46: Installation Of The Configurator Program

    To be able to configure the FP Web-Server, a Windows computer with an Ethernet network interface card has to be connected to the same network as the FP Web-Server. The computer must be configured in such a way that it supports the TCP/ IP network protocol.

  • Page 47: Determination Of The Ip Configuration

    The IP address (see page 166) consists of 4 numbers (0 to 255). The first numbers define the network address, the other numbers define the participant's address. The IP address of the FP Web-Server can be fixed or it can be allocated dynamically by a DHCP-Server.

  • Page 48: Generate A New Configurator Project

    <F1>. • With this version of the FP Web-Server, an HTML online help has been realized. If the help is not displayed (e.g. with Windows95 or Windows NT with service pack 5 or earlier), please install the HTML help work shop from the installation CD.
  • Page 49 FP Web-Server V2.11 First Steps configurator. • The "default_project" works without PLC data, i.e. it does not need to be connected to the FP Web-Server. Nevertheless, in case "Example1" is used a PLC should be connected.

  • Page 50: Transfer A Configurator Project To The Fp Web-Server

    Please select the ID number of the respective FP Web-Server (double-click or press <ENTER>). If the FP Web-Server is put into operation for the first time (or a new version of the Configurator was installed), please initialize the FP Web-Server ONCE before transferring the project, i.e.
  • Page 51 FP Web-Server V2.11 First Steps • If the current password of the FP Web-Server is not the same as the password of the project, the user name and the password are asked before transmission and/or restart. ([SEND], [INITIALIZE], [REBOOT]). •...

  • Page 52: Internet Browser To Test The Fp Web-Server

    3.8 Internet Browser to Test the FP Web-Server The HTML pages of the FP Web-Server can be displayed with a standard Internet browser. Start the Internet browser and enter the IP address of the FP Web-Server into the "Location" field.
  • Page 53 MAIN.HTM to use password protection. • If the FP Web-Server is operated in an office network with a Proxy gateway to the Internet, accessing the FP Web-Server HTML pages might take a long time. In this case, shut off the Proxy function of the browser for this specific IP address of the FP Web-Server.

  • Page 54: Further Information

    • Details on Ethernet/ RS232C Ports (see page 104) • Dial-up Networking Setup for Computer and FP Web-Server (see "Dial-up Networking Setup for Computer/ FP Web-Server" on page 110) • IEC 60870 Functions of the FP Web-Server (see page 151)

  • Page 56: Configurator Software

    Chapter 4 Configurator Software...

  • Page 57: General Information On The Fp Web-Server Configurator

    Every "Configurator project" is stored in a separate folder. Email text files, .INI text files and a subfolder "http" in which all in Web pages for the FP Web-Server are stored belong to a project. There are 3 ways to start the FP Web-Server configurator: 1.
  • Page 58 4.1 General Information on the FP Web-Server Configurator FP Web-Server V2.11 • IEC 60870 Functions of the FP Web-Server (see page 151) • PPP-Client Dial-Out (see page 138) and • NTP-Time (see page 140) In the following sections the individual control buttons of the first page ("project" page) of the...

  • Page 59: Control Buttons For The Administration Of The "Configurator Project

    FP Web-Server V2.11 Configurator Software 4.2 Control Buttons for the Administration of the "Configurator Project" For a detailed description on the control buttons, refer to the online help under the respective keyword of the button.

  • Page 60: Control Buttons For Fp Web-Server Control

    4.3 Control Buttons for FP Web-Server Control FP Web-Server V2.11 4.3 Control Buttons for FP Web-Server Control For a detailed description on the control buttons, refer to the online help under the respective keyword of the button.

  • Page 62: Base Configuration

    Chapter 5 Base Configuration...

  • Page 63: Main Configuration

    FP Web-Server V2.11 Base Configuration 5.1 Main Configuration The main settings for the FP Web-Server are adjusted on the "Config" Configurator page. At least the following entries need to be made: • The IP configuration has to be entered. •...

  • Page 64: Ethernet Ip Configuration

    IP and TCP/ IP (see page 166)). The first numbers define the network address, the other numbers define the participant's address. The IP address of the FP Web-Server can be fixed or it can be allocated dynamically by using a DHCP-Server.
  • Page 65 FP Web-Server V2.11 Base Configuration - Gateway: What is the gateway's IP address? (0.0.0.0 if there is no gateway to be used). For further information please refer to the online help under the keywords "Username and password", "DNS parameter settings", PLC link interface" or "Selection of the main functions".

  • Page 66: Email Setup

    Chapter 6 Email Setup...

  • Page 67: Email Functions Of The Fp Web-Server

    64) is used to distribute the emails triggered by the PLC. The PLC can use predefined text messages (stored in the FP Web-Server) as well as variably created email texts (stored as ASCII strings in the PLC). The FP Web-Server informs the PLC if the email has been sent out correctly.
  • Page 68 Open the "Email" tab in the Configurator for all further settings: "Email sending enable": This setting is used to turn the email function of the FP Web-Server on or off. Disable this checkbox if the email function is not used. This saves the FP Web-Server's memory.
  • Page 69 "PLC control relay": The PLC internal relay Rxy is prompted by the FP Web-Server and is set by the PLC in case an email has to be sent. Rxy is reset by the FP Web-Server after the email has been sent.

  • Page 70: Predefined Email Texts In The Fp Web-Server

    Optionally a PLC data file attachment (see page 59) can be defined in the email text. 6.1.2 Predefined Email Texts in the FP Web-Server Up to 4 email texts (0 to 3) can be predefined in the FP Web-Server, which can be selected and sent from the PLC.

  • Page 71: Email Function Used For Communication Tests

    FP Web-Server V2.11 Email Setup or for a text attachment is: {A_D_00200_00001_T01_filename.txt} The parameters in this tag have the following meanings: Char. Offset Description Example Tag must start on line with '{A_' PLC register type: D=DT F=FL L=LD First PLC register address to read...

  • Page 72: Plc Program With Function Block From The Library M_Ce_Lib

    Web-Server (after an optional Internet dialup), which tests the communication. Do not forget to set up the FP Web-Server with a valid email server name and existing DNS server IP address. For further information, refer to the online help under the keyword "Periodic communication tests".
  • Page 73 50 * 0,2 = 10s This value needs to significantly exceed the value defined in the poll time delay of the Configurator project! If the FP Web-Server sends an email via Internet dialup the value should be set about 1000s (3 minutes).
  • Page 74 FP Web-Server V2.11 The RS232C parameter of the PLC can be adjusted in FPWIN Pro. The RS232C communication parameter of FP Web-Server to the PLC for the email handling is determined in the Configurator "Config" tab, see also PLC Interface.

  • Page 75: Generalities On The Email-Server

    FP Web-Server V2.11 Email Setup Output "Active" "Active" indicates if the function block "M_Send_Email" or the FP Web-Server is still busy sending the email. Output "MailDone" "MailDone" is set as soon as the sending of the email has been completed. Output "Active" is reset simultaneously.
  • Page 76 6.1 Email Functions of the FP Web-Server FP Web-Server V2.11 Email-Server needs to have access to the Internet. This poses no problem if you are using an Email-Server in your LAN that uses the Proxy to the Internet. You only need to set the following email server parameters (also refer to the online help under the keyword "Example2"...

  • Page 77: How To Find Out The Address Of The Email Server

    Email Setup B) Internet email The FP Web-Server can also use a modem connected to the 9-pin port to dial up the Internet and send emails via an Internet Service Provider. When using this function you need a modem (or GSM module) and the following parameters (also refer to "Example7"...
  • Page 78 6.1 Email Functions of the FP Web-Server FP Web-Server V2.11 If possible it is recommended to find out the names' IP addresses. You can request from the email-ISP or by using a Windows computer: 1. Configure and establish a remote network connection to the Internet (via modem) 2.

  • Page 79: Email Configurator Input Fields

    FP Web-Server V2.11 Email Setup 6.2 Email Configurator Input Fields In the following the individual input fields of the Configurator are described: For a detailed description of each field or button in the dialog, set the cursor into the field and...

  • Page 80: Http Server Functions/ Web Pages

    Chapter 7 Http Server Functions/ Web Pages...

  • Page 81: Details On The Fp Web-Server's Web

    7.1.1 Testing the FP Web-Server Functions For details on how to put a FP Web-Server with HTML Pages in operation, see also First Steps (see page 31). The HTML Pages of the FP Web-Server can be displayed by a standard Internet browser.
  • Page 82 7.1 Details on the FP Web-Server's Web Page Functions FP Web-Server V2.11 For the "default_project" (without PLC data, FP Web-Server may not be connected to a PLC) for example: Or for 'Example1' (with PLC Data):...

  • Page 83: Internet Browser Settings

    7.1.2 Internet Browser Settings If the FP Web-Server is operated in an office network with a Proxy gateway to the Internet, the access to the FP Web-Server HTML pages might take a long time. In this case, shut off the Proxy function of the browser for this specific IP address of the FP Web-Server.

  • Page 84: Http Address, Cgi Function Plc And Calling Parameter

    7.1 Details on the FP Web-Server's Web Page Functions FP Web-Server V2.11 Here is the HTML page 'MAIN.HTM' of the FP Web-Server displayed. By clicking the links you can test the individual pages. For example, by clicking [Display] the DT200 page (with PLC data) is displayed: By clicking on [On] or [Off] the output of the PLC can be set.

  • Page 85: Configurator Settings Concerning The Http Server

    For programming examples in C++ and Java to control PLC relays via the http function, please refer to the online help under the keyword "Appendix K) Programming Samples: Access to the FP Web-Server / PLC via TCP". 7.1.5 Configurator Settings Concerning the Http Server...

  • Page 86: Editing Html

    7.1.6 Editing HTML Pages All web pages the FP Web-Server should be able to display should be created and/ or edited on a computer. To do so, it would be best to mark the respective file of the project in the configurator in the "Web"...

  • Page 87: Compiling And Transferring Html

    FP Web-Server V2.11 Http Server Functions/ Web Pages http://WDVL.com/Authoring/HTML/ http://whatis.techtarget.com/ http://selfaktuell.teamone.de/links/ The first HTML page that displays PLC data might look as follows (text file): HTML Editor: Standard HTML editors like "Frontpage" (Microsoft Browser), "Composer" (Netscape Browser) and "MS-Word" provide many user-friendly functions to design HTML pages. Many browsers also provide an integrated editor (see Netscape Composer in the example below or Frontpage of the IE).

  • Page 88: Data Fields For Displaying Plc Data On Html

    "HTML-Compiler". Such a file is then named an .MTM file and saved on the FP Web-Server. Upon the request of an Internet browser, the fields are filled with he current data by the FP Web-Server and displayed by the browser.
  • Page 89 Address of the PLC Data, e.g. DT200 or Y7. The address range supported by the FP Web-Server is 0 ... 32765. For internal relays, the last position of the address is a hexadecimal number from 0...F, e.g. R2F Numbers: Number of characters reserved in HTML. The rest will be cut off.
  • Page 90 7.1 Details on the FP Web-Server's Web Page Functions FP Web-Server V2.11 Type d = decimal, whole-numbered (16-bit, INT ) i = decimal, whole-numbered (16-bit, INT ) u = unsigned decimal, whole-numbered (16-bit, WORD ) o = unsigned octal (16-bit, WORD ) (only display, not for data entry)
  • Page 91 FP Web-Server V2.11 Http Server Functions/ Web Pages Format PLC value Display {DT201_6_+d} 12345 (3039hex) "+12345" b) Spaces and zeros Format PLC value Display {DT201_6_i } DT201=17 "17 " (HTML suppresses multiple spaces) {DT201_6_06i} DT201=17 "000017" {DT201_6_ 6i} DT201=17 "...
  • Page 92 7.1 Details on the FP Web-Server's Web Page Functions FP Web-Server V2.11 to insert a decimal sign into an integer display. Format PLC value Display {DT201_7_.3i} DT201=1234 1.234 {DT201_6_.4d} DT201= -12 -0.0012 {DT201_7_05.2d} DT201= 17 000.17 {DT201_16_.4lu} DDT201= 12 0.0012 {DT201_5_.2X}...

  • Page 93: Using Variable Names Instead Of Absolute Plc Addresses

    &A=x . If an HTML page from FP Web-Server is requested by the browser but the PLC data cannot be read out from the PLC (Baud Rate, Problems with Cables...), an HTML page with an error message will be displayed instead of the requested page.
  • Page 94 7.1 Details on the FP Web-Server's Web Page Functions FP Web-Server V2.11 In the following example based on "Example4" the FPWIN Pro project with the following global variable list is used: Carry out the following steps in FPWIN Pro to export the global variable list as a CSV file: Generating a CSV File 1.
  • Page 95 FP Web-Server V2.11 Http Server Functions/ Web Pages 3. Save the CSV file by clicking on [Export] These steps have generated a CSV file in the Configurator project folder If a text editor is used the contents of the CSV file looks like this:...
  • Page 96 In the HTML editor the use of these variable names instead of absolute address values can look as follows: 2. If this HTML page is now downloaded to the FP Web-Server the variable names are replaced by the absolute PLC addresses found in the CSV file...

  • Page 97: Access Protection For Individual Html

    To protect individual pages only, enter the {PW} command in the HTML code. The text {PW} is no longer displayed on the browser after sending the page using [SEND] to the FP Web-Server. Three variations are possible: 1.

  • Page 98: Inputs For Controlling Plc Internal Relays On Html

    7.1 Details on the FP Web-Server's Web Page Functions FP Web-Server V2.11 7.1.11 Inputs for Controlling PLC internal relays on HTML Pages To control PLC internal relays via HTML pages, hyperlinks, as they are described under Calling Parameters (see page 73), are used. In the example projects you can find "links" for controlling in the DT200.HTM and MENT.HTM pages:...
  • Page 99 FP Web-Server V2.11 Http Server Functions/ Web Pages VALUE="{DT205_6_+d}" DT205 is read out of the PLC and interpreted as a signed decimal number and displayed in the input field with the algebraic sign. After that, the input editor is started in the HTML page.
  • Page 100 7.1 Details on the FP Web-Server's Web Page Functions FP Web-Server V2.11 The individual HTML commands can be entered (exactly as described above) into the HTML code of the page and then adjusted respectively. Some HTML editors provide additional help and automatic generation for creating submit fields.

  • Page 101: Notes On Strings

    FP Web-Server V2.11 Http Server Functions/ Web Pages Entry format User entry Data in PLC register DT201_16_X 8000 DT201= -32768 (8000 hex) DT202_16_lx 01E240 DDT202= 123456 (0001E240 hex) Complete example to enter a 16-bit hex value for DT210: <form action="/plcpost" method="POST" target="SUBWIN"...
  • Page 102 - Un-initialized String: If a string variable is not initialized by the FPWIN Pro project, the 1st Word (maximum string length) is zero. With this the FP Web-Server cannot store any character in this string because no memory is reserved for storing! - Null-String: If such a string has the length 0 (zero) the current length of the string (2nd Word) is also set to 0, i.e.

  • Page 103: Example On Formatting Display And Input Fields

    FP Web-Server V2.11 Http Server Functions/ Web Pages 7.1.13 Example on Formatting Display and Input Fields The file TEST.HTM of the "Example2" project shows a multitude of formatting methods: TEST.HTM: In the HTML Editor: Input Fields in the HTML Editor:...
  • Page 104 7.1 Details on the FP Web-Server's Web Page Functions FP Web-Server V2.11 TEST.HTM: Displayed in the Browser:...

  • Page 105: Automatic Page Reload Upon Submitting Plc Data

    HTML Pages (see "Defining Input Fields for PLC Data on HTML Pages" on page 87). 7.1.14 Automatic Page Reload upon Submitting PLC Data If the html file "s_m_done.htm" is uploaded to the FP Web-Server before you start the unit the html code of this file will be reloaded to the browser after submitting PLC data.

  • Page 106: Example On Java Script Automations

    7.1 Details on the FP Web-Server's Web Page Functions FP Web-Server V2.11 <script language="JavaScript"> opener.location.reload(true); </script></body></html> This script cannot be used with all versions of MS Internet Explorer while some windows of html browsers are opened at the same time containing different data.
  • Page 107 FP Web-Server V2.11 Http Server Functions/ Web Pages In this example DT200 (variable name "Counter") is read from the PLC and interpreted as number 'n'. In a loop that follows, 'n' dashes ('-') are output. The resulting HTML page looks as...

  • Page 108: Notes On Html Frames

    The FP Web-Server can deliver XML files The FP Web-Server's http server can also deliver PLC data within XML files. Similar to an HTML file, the XML file can include the special PLC data tag (see "Data Fields for Displaying PLC Data on HTML Pages"...
  • Page 109 Web-Configurator Tool. In this example we use an FP Web-Server unit with the IP address 199.199.26.52. 3. A TCP client can request the FP Web-Server unit's http server to deliver the XML file "Producn.xml" (including current PLC data), which takes on the form: http://199.199.26.52/plc?Producn.xml...

  • Page 110: Ascii Character Codes For Strings

    7.1 Details on the FP Web-Server's Web Page Functions FP Web-Server V2.11 7.1.18 ASCII Character Codes for Strings Only 7 bit ASCII character codes are supported when strings are displayed or entered in HTML.

  • Page 111: Configurator Http Administration And Functions

    Web files with this dialog. All Web pages for the FP Web-Server are created and/or edited on the computer. To do this, it is best to select the respective file of the project in the Configurator's "Web" screen and start the preinstalled editor of the operating system by double-clicking (or choosing <Enter>...
  • Page 112 • If spaces or Japanese characters are used, an error message pops up before transmission to the FP Web-Server. • All file names have to correspond to the DOS 8.3 format, i.e. the name may only have up to 8 characters and the extension (type) only up to 3 characters after the period.

  • Page 114: Ethernet/ Rs232C Ports

    Chapter 8 Ethernet/ RS232C Ports...

  • Page 115: Generalities On The Ethernet/ Rs232C Ports

    Ethernet). In this configuration the FP Web-Server is the server and the computer is the client. To setup an FP Web-Server port as a client, refer to the online help under Enable Transparent TCP/IP Client Port. With two FP Web-Server units that are setup as a pair of transparent port server and client, two FP-Sigma can communicate with each other via PLC link function (PC link protocol) (take into account the timeout set in the PLC).

  • Page 116: Client's Side

    Clients. • MEWTOCOL communication between a PLC and FPWIN Pro (or an FP Web-Server port client or GK panel) can involve a very high data load, i.e. with a single FPWIN Pro client, communication can be hindered so gravely that http pages and email communication are slowed down significantly.
  • Page 117 The following settings in GKWIN are required: Comments: If the FP Web-Server is connected, do not activate the check box "Use ET-LAN"! In the setup example above, only PLC No. 3 is an ET-LAN unit. Any communication via Ethernet must be stopped before a new configuration is sent to the FP Web-Server.
  • Page 118 8.1 Generalities on the Ethernet/ RS232C Ports FP Web-Server V2.11 d) Also the FP2 ET-LAN unit can communicate with the FP Web-Server ports. Using the ET1 library for FPWIN Pro makes PLC programming easy: e) Program your own MEWTOCOL client application: For more information refer to the C++ and Java programming example in the online help under the keyword "A.) Client Programming Example to Access PLC Data (Via...

  • Page 120: Dial-In Setup For Ppp-Server

    Chapter 9 Dial-In Setup for PPP-Server...

  • Page 121: Dial-Up Networking Setup For Computer/ Fp Web-Server

    Using its standard Windows Dial-up Networking (PPP-Client) functions you can call up a FP Web-Server. For a detailed description of the parameters for the PPP-Server in the FP Web-Server, refer to PPP-Server Configurator Inputs and Parameters (see page 127). •...

  • Page 122: Modem And Dial-Up Networking Installation Of A Windows Client

    "modem", "system settings". Comments: • We recommend the Panasonic FP MODEM-EU for our customers in Europe. • The driver "MdmFPmodem.inf" for the FP MODEM-EU (now supports all versions of Windows NT) can be found on the Configurator setup CD in the folder: "Other-Tools/PPP_Cable"...
  • Page 123 FP Web-Server V2.11 Dial-In Setup for PPP-Server 2. Press [ADD] to add a new modem The modem used must support RTS/CTS flow control. Use command AT%K0&K3To enable this for the FP Modem-EU. 3. Windows95: Install the dial-up networking and restart the computer...
  • Page 124 9.1 Dial-up Networking Setup for Computer/ FP Web-Server FP Web-Server V2.11 In "system settings", "network", a dial-up networking adapter with TCP/ IP protocol (Optional: the client gets his address automatically from the server.) should be installed now. For details on the TCP/ IP installation on a Windows computer, refer to the online help under TCP/IP Setup: Configurator/Browser Operations Via LAN.
  • Page 125 FP Web-Server V2.11 Dial-In Setup for PPP-Server...
  • Page 126 9.1 Dial-up Networking Setup for Computer/ FP Web-Server FP Web-Server V2.11 5. After having completed the "New Entry", double-check the "Properties"...
  • Page 127 FP Web-Server V2.11 Dial-In Setup for PPP-Server...
  • Page 128 Name and Password and preinstalled passwords and safety instructions (see page 170). Example: Even if the password was "Abc1", it has to be entered as "abc1" for dial-up networking. The Windows computer and the FP Web-Server should NOT be connected...

  • Page 129: Setup Of The Modem Connected To The Fp Web-Server For Ppp-Communication

    Internet provider with that of the FP Web-Server (i.e. the modem connected to it). 9.1.3 Setup of the Modem Connected to the FP Web-Server for PPP-Communication The modem has to be connected to the 9-pin RS232C port of the FP Web-Server.

  • Page 130: Fp Web-Server Ppp Gateway Functions

    Using the FP Modem-EU for PPP communication is recommended. Its factory default setup can be used and it only needs to be connected via a 1:1 cable to the FP Web-Server. RTS/CTS flow control needs to be enabled with AT&K3. To connect the modem to the FP Web-Server, refer to PPP-Server with modem (see page 163).
  • Page 131 FP Web-Server V2.11 Dial-In Setup for PPP-Server Configuration example for the FP Web-Server that implemented the PPP-Server access: The following parameters need not to be changed and can also be used for your PPP gateway setup.
  • Page 132 With this configuration example, it was possible to test the IP_forwarding successfully, i.e. a Windows computer that dialed up the FP Web-Server gateway was able to communicate with the other FP Web-Servers in the Ethernet LAN (were the Gateway-FP Web-Server is in).

  • Page 133: Fpwin Pro Setup To Use The Remote Dialup Network

    The standard function 'Remote Dialup Networking' of Windows is used for FPWIN Pro to communicate with an FP Web-Server via modem dialup. You can see how to set up Windows, FPWIN Pro and the FP Web-Servers in the following diagram: See example setup in "Configuration for an Initial Test"...

  • Page 134: Ppp Communication Via Null Modem Cable

    172.148.180.x: FP Web Ethernet (any IP except 192.168.206.x or 133.254.83.x) Comments: • Additionally (and in parallel) the FP Web-Server (Gateway Unit_1) can be set up to use the modem for Internet dialup and email sending. • For details on the PPP server settings of the FP Web-Server, refer to configuration example for the FP Web-Server that implemented the PPP-Server access (see page 119).
  • Page 135 8. Select the COM port of the computer to be used (i.e. COM2) and select [OK] 9. Back on the main modems screen, select the new "Generic NULL Modem" and click 'Properties' 10. Set the maximum speed to the same value as specified in the FP Web-Server configuration (i.e. 38400) 11. Reboot the computer Remote Dialup Network Setup: 1.
  • Page 136 If the dial-up, connect screen is not displayed use: Start → Settings → Network and Dial-up Connections → “Null modem with COM1 and 19200bps to PPP-Server” 1. Enter the name and password as defined in the FP Web-Server configuration. Click [Connect] The 'dial-up' process can take a few seconds.
  • Page 137 The page "MAIN.HTM" as setup with the configurator should be displayed. Pin assignment of the RS232C null modem cable The computer's COM port is directly connected to the FP Web-Server's 9-pin port via a null modem cable. Use a standard null modem adapter having 9-pin, female, RS232C connectors on both sides.

  • Page 138: Dial-In Inputs And Parameters For Ppp-Server

    The modem and the transparent TCP/ RS232C port cannot be used at the same time (except when a second FP Web-Server unit is used). • The modem has to be connected to the 9-pin RS232C port of the FP Web-Server. The modem must be set up to support the RTS/CTS flow control. •...

  • Page 140: Dial-Out Setup For Ppp-Client

    Chapter 10 Dial-Out Setup for PPP-Client...

  • Page 141: The Internet Dial-Out Function

    FP Web-Server V2.11 Dial-Out Setup for PPP-Client 10.1 The Internet Dial-Out Function 10.1.1 Internet Email Settings The following step-by-step procedure enables emails to be sent via Internet dialup: 1. Register an Internet email account with your email ISP if you do not have an Internet email account 2.
  • Page 142 The authentication method is normally set to "PAP". 8. Set a baud rate that complies with the modem used The FP Web-Server always connects with the internal settings of 8 bits, none parity and 1 stop bit. 9. Set the idle timeout The idle timeout can be lowered to approx.

  • Page 143: Notes For Advanced Users

    If your FP Web-Server is configured to use a gateway, i.e. if communication with the FP Web-Server is set up via a gateway, you need to take into account that the FP Web-Server does not use this gateway during an active dialup connection. This means that TCP port, FPWIN,...
  • Page 144 10.1 The Internet Dial-Out Function FP Web-Server V2.11 PCWAY or http communication through the gateway is temporarily interrupted while an Internet email is being sent. • Before dial-up connection. The FP Web-Server can find all stations.
  • Page 145 GMX. It can be assumed that GMX blocks sending 'swamp mail'. Modem connection and setup The FP Web-Server's dial-out (PPP-Client) function is set up for RTS/CTS handshake (pin 7 and 8 of the 9-pin connector). The following two paragraphs describe how to setup the modem to also support RTS/CTS handshake.

  • Page 146: When Using A Cellular Phone (Gsm) Modem

    Later versions will implement an extended status display. FP Web-Server configured as a PPP-Server You can also configure a second FP Web-Server as a PPP-Server which can then be dialed up instead of an ISP. This remote FP Web-Server, i.e. the PPP-Server, works as a dialup gateway for a LAN where an email server can be used to send emails.

  • Page 147: Gprs Internet Connections

    GPRS Internet connection. . 10.1.5 When Using ISDN Adapters The PPP-Server (dial-in) and PPP-Client (dial-out) of the FP Web-Server can also handle ISDN modem adapters for remote connections. Following are some hints to use the FP ISDN 64k...
  • Page 148 Reset the FP ISDN 64k with AT&F3 (see dial-in user init. command) • Possible modem baud rate up to 57600 bps • RS232C cable from the FP ISDN 64k to the 9-pin Sub-D of FP Web-Server: FP ISDN 64k FP Web-Server FG ----------...

  • Page 149: Internet Dial-Out Settings

    FP Web-Server V2.11 Dial-Out Setup for PPP-Client 10.2 Internet Dial-Out Settings Open the "Dial-Out" Tab in the Configurator and enable the check box "Dial-up Internet Service Provider (ISP) for email..." to configure the settings for: • ISP Dial-up • Modem •...

  • Page 150: Ntp Server For Plc Clock Synchronization

    Chapter 11 NTP Server for PLC Clock Synchronization...

  • Page 151: S)Ntp Servers

    FP Web-Server can update the date/time RTC registers within the PLC. The update of the PLC clock can be done independently of the PLC program in constant time intervals. Additionally the FP Web-Server can be set up in this way so that a PLC-controlled internal relay can trigger a PLC clock update.
  • Page 152 Please be aware that an enabled NTP module takes up about 11kB of the FP Web-Server's FLASH memory. • The server timeout is 2 minutes, i.e. the NTP server must respond to the time request of the FP Web-Server within 2 minutes.

  • Page 154: Modbus Functions

    Chapter 12 Modbus Functions...

  • Page 155: Overview On Modbus-Tcp Functions Of The Fp Web-Server

    Which function codes and data types are supported depends on the unit implementation. FP Web-Server Specific Implementation The FP WEB Configurator Tool Version 2.1 allows you to configure the FP Web-Server (as an interface to the PLC) with the following Modbus-TCP server and client functions. Function Comment Modbus-TCP Client →...
  • Page 156 12.1 Overview on Modbus-TCP Functions of the FP Web-Server FP Web-Server V2.11 For an overview on all functions, please refer to the block diagram (see page 10). 1. This function uses the 2nd RS232C (9-pin Sub-D connector). 2. Since Modbus protocol, in contrast to the PLC, only recognizes 4 different memory areas, a configurable Address-Translation-Table was implemented.

  • Page 157: Modbus-Tcp Server Of The Fp Web-Server In General

    Modbus Functions 12.2 Modbus-TCP Server of the FP Web-Server in General The FP Web-Server can be accessed by a Modbus-TCP client (SCADA) via Ethernet for PLC data communication. To do so, the FP Web-Server requests PLC data (MEWTOCOL protocol) via the 3-pin or/and 9-pin RS232C port. The 9-pin RS232C can alternatively communicate via Modbus-RTU protocol with a Modbus-RTU slave unit.
  • Page 158 12.2 Modbus-TCP Server of the FP Web-Server in General FP Web-Server V2.11 • This function uses the configurable Modbus to PLC address translation table. • The gateway function routes all Modbus function requests. • The Modbus-TCP server can handle UDP broadcast messages (FP-WEB2 does not generate a response message).

  • Page 159: Modbus-Tcp Client Of The Fp Web-Servers In General

    For PLC control a shared buffer in the PLC's memory is used. The PLC program places the server IP address and Modbus commands in this buffer. The FP Web-Server reads the buffer and executes the commands. Additionally, the PLC can also access a Modbus-RTU slave unit via the 9-pin RS232C interface.
  • Page 160 12.3 Modbus-TCP Client of the FP Web-Servers in General FP Web-Server V2.11 Further information: For more information on Modbus-TCP client settings and the respective client functions, please refer to the online help under the keyword "Modbus-TCP Client Settings".

  • Page 161: Appendix For Modbus Functions

    FP Web-Server V2.11 Modbus Functions 12.4 Appendix for Modbus Functions The following sections are described here: - Combining multiple Modbus Functions - Address Translation Table - Supported Modbus Functions - Modbus-TCP Server Performance - PLC Buffer Definition for the Modbus-TCP Client - Sample PLC Programs to Control the Modbus-TCP Client Functions For more information, please refer to the online help under the keyword "Appendix for Modbus...

  • Page 162: Iec 60870 Functions Of The Fp Web-Server

    Chapter 13 IEC 60870 Functions of the FP Web-Server...

  • Page 163: Iec 60870 General Functions

    13.1 IEC 60870 General Functions The following connections to the FP Web-Server are possible: 1. The PLC is connected to the FP Web-Server via a 3-pin RS232C up to 115200 bps (see PLC connection to the FP Web-Server (see page 162)).

  • Page 164: Details Of The Iec 60870 Configuration: Modem And Multipoint Settings

    13.1 IEC 60870 General Functions FP Web-Server V2.11 Perform the following steps to disable extended MEWTOCOL commands for FPWIN Pro: 1. Locate file "NAiS_MewPLC.DAT" under C:\Program Files\NAiS MEWNET 2. Open "NAiS_MewPLC.DAT" with a text editor, e.g. Notepad 3. Find the section for your PLC, e.g. [FPSIGMA] or [FP2] 4.
  • Page 165 FP Web-Server V2.11 IEC 60870 Functions of the FP Web-Server - mode: Multipoint-party line 1. Parity Even and a baud rate other than 1200bps are only available from FP Modem-EU firmware version 1.23 onwards (use ATi3 to display the version).

  • Page 166: Parameters For Iec 60870

    13.2 Parameters for IEC 60870 FP Web-Server V2.11 13.2 Parameters for IEC 60870 Open the "IEC 60870" Tab in the Configurator for the following settings: For a detailed description of each field or button in the dialog, set the cursor into the field and...

  • Page 167: Iec 60870 Library For Control Fpwin Pro

    13.3 IEC 60870 Library for Control FPWIN Pro To use the IEC 60870 functionality of the FP Web-Server, a library for Control FPWIN Pro is delivered with your Installation CD. For details refer to the online help of the Library. Click [Start] ->...

  • Page 168: Java Applet Library "Mew.jar

    Chapter 14 Java Applet Library "MEW.JAR"...

  • Page 169: Introduction To Fp Web-Server And The Java Applet "Mew.jar

    Java. These programs are stored together with the HTML files in the Http-Server section on the FP Web-Server unit. The Java Applet file has the file extension .JAR (Java Archive). An Internet browser and a special tag within your HTML page are needed to download the .JAR to the computer.

  • Page 170: Additional Information

    Chapter 15 Additional Information...

  • Page 171: Contents Of The Cd And Auxiliary Programs

    FP Web-Server V2.11 Additional Information 15.1 Contents of the CD and Auxiliary Programs You will find the following folders on the CD: Folder Subfolder Comment FP-Web-Configurator Configurator Setup including examples for http and FPWIN Pro FP-Web Documents Different documentation, Manuals...

  • Page 172: Description Of The Html Examples

    The following examples supplied with the installation of the FP Web-Server configurator show in a simple way the HTML functions of the FP Web-Server and may be used as source material for advanced projects. All examples for editing can be found in the installation directory of the FP Web-Server under "Program Files/ Panasonic MEW Control/ Configurator/ FP-WEB2/...

  • Page 173: Plc Connection, Cable Drawings, Modem

    15.3 PLC Connection, Cable Drawings, Modem Please also see the installation sheet " FPWEB_Server_Leaflet" supplied with your FP Web-Server for important notes, cables and installation. To connect and wire to an Ethernet, please refer to "Setup of an Individual Ethernet LAN (see page 168)".

  • Page 174: Cable Drawings And Modem

    15.3 PLC Connection, Cable Drawings, Modem FP Web-Server V2.11 15.3.2 Cable Drawings and Modem The possible cables for connecting the FP Web-Server to a Panasonic PLC: G (GND) = System Ground R (RxD) = Receive Data S (TxD) = Transmit Data...
  • Page 175 The 3-pin screw terminal is from Phoenix: Phoenix product: MC1,5/3-ST-3,5 Order number: 18 40 37 9 PPP-Server with modem: Use a standard computer/ modem cable to connect the FP Web-Server to a modem: For the FP ISDN 64k or FP Modem 14.4 (both available from PEW Germany) use the following cable:...

  • Page 176: Clearing Passwords

    15.3 PLC Connection, Cable Drawings, Modem FP Web-Server V2.11 15.3.3 Clearing Passwords To reset the unit i.e. clear the password and the configuration of a FP Web-Server, carry out the following steps: 1. Press [FIND] and select the appropriate FP Web-Server by double-clicking To select another unit, refer to the online help under Select from List of Units Found.

  • Page 177: Ip And Tcp/ Ip

    TCP/ IP Setup for Configurator/Browser Operations via LAN. FP Web-Server: The IP address of the FP Web-Server can be fixed or it can be allocated dynamically by a DHCP-Server. For more information refer to the online help under DHCP or Fixed IP Address.
  • Page 178 - IP Add=x.y.60.31 - Netmask=255.255.255.0 - Gateway=x.y.60.1 B) In case the FP Web-Server should be connected to an existing network, the following data must be asked from the network administrator: - Is there a DHCP-Server in the network? If NOT:...

  • Page 179: Setup Of An Individual Ethernet Lan

    Private email server: For using the email functions in such a "mini-network", an Email-Server has to be installed on the (or on one of the) computer. For example, on the Panasonic Ethernet exhibition board the Email-Server "1 Class Mail Server 2.0" by "1cis.com" was used successfully. For further information, refer to Details on the Email-Server (see page 64).
  • Page 180 15.5 Setup of an Individual Ethernet LAN FP Web-Server V2.11 Hub or switch?: If the IP address (and/or the data rate 10/ 100 MBPS) are not modified very often, a switch might increase the performance of the network in comparison to a hub: A switch is an intelligent unit with which you can subdivide the Ethernet in sub-segments that are widely independent from each other.

  • Page 181: Preinstalled Passwords And Safety Instructions

    FP Web-Server V2.11 Additional Information 15.6 Preinstalled Passwords and Safety Instructions User name and password can be preset in the Configurator project. Overview of the preset passwords: Service User Name: Password: Factory Default Factory Default Telnet user user user user...
  • Page 182 15.6 Preinstalled Passwords and Safety Instructions FP Web-Server V2.11 2. The password of the PLC can be adjusted with the help of FPWIN Pro via Online → Security Settings...

  • Page 183: Troubleshooting

    (double-click) an FP Web-Server unit, please check the network settings. If an automatically generated IP address setting is to be used Make sure that the computer and the FP Web-Server's configuration is set up to use a DHCP server. 1. Under "Settings / Network Connections", open the properties dialog of the computer's Ethernet/LAN card 2.
  • Page 184 “Config” If a static IP address setup should be used (private network or cross-over cable) Check the IP address settings of your computer and the FP Web-Server configuration. 1. Under "Settings / Network Connections", open the properties dialog of the computer's Ethernet/LAN card 2.

  • Page 185: Problems Finding An Fp Web-Server Unit Or Unable To Send Configuration

    FP Web-Server V2.11 Additional Information subnet mask) should be identical to the FP Web-Server configuration. However the right part of the computer's and FP Web-Server's “IP address” should be different. 15.7.2 Problems Finding an FP Web-Server Unit or Unable to Send Configuration If with FP Web-Tool, you cannot: •...
  • Page 186 15.7 Troubleshooting FP Web-Server V2.11 a) Disable the WindowsXP firewall on your LAN connection For this go to "Settings / Network connections" and open the properties of the Ethernet/LAN card. Under "Advanced" disable the firewall function. b) If [Send] or [Send File] does not work You receive an error message: "The computer is disconnected from the network".
  • Page 187 FP Web-Server V2.11 Additional Information c) Start the Internet-Explorer, open menu "Tools / Internet Options / Connections" and select "never dial a connection". Verify that there are valid settings in the sub-dialog "LAN Settings". d) Reset all Windows and Internet-Explorer security settings for a test.
  • Page 188 Use the latest FP Web-Configurator Tool version. g) Edit the file "tool.ini" at "C:\Program Files\ Panasonic MEW Control\Configurator\ FP-WEB2" with Notepad. Change [FTP] PASSIV=1 from 0 to 1. And then test function again.

  • Page 189: Panasonic Hotline

    15.7.3 Panasonic Hotline Should you have any problems, we would like to assist you as fast and effectively as possible. If you have questions on the FP Web-Server that cannot be clarified with the documentation accompanying the product, please call your distributor:...

  • Page 190: Index

    BEFORE BEGINNING.......i Email Function Used for Communication BEFORE YOU START ......2 Tests ..........60 Email Functions of the FP Web-Server . 56 Email Parameters in Configurator Projects ............56 Cable Drawings ........162 Email Server, how to find out its address66 Cable Drawings and Modem ....
  • Page 191 Notes on XML Files with PLC Data ..97 Http Server Functions/ Web Pages ..69 NTP Server for PLC Clock Synchronization ............139 IEC 60870 Functions of the FP Web-Server ............151 Overview on Modbus-TCP Functions of the IEC 60870 General Functions ..... 152 FP Web-Server.........
  • Page 192 System Sample Network ....... 11 TCP/ IP Network Installation of a Windows Client ..........110 Technical Data........19 Testing the FP Web-Server Functions .. 70 The Ethernet Network......33 The Internet Dial-Out Function .... 130 Transfer a Configurator Project to the FP Web-Server ........

  • Page 193: Record Of Changes

    Record of Changes Manual No. Date Description of Changes ACGM0151END August 2001 First European Edition March 2002 Update of First European Edition: Optimized Graphics Corrected Errors ACGM0151V1.1END Sept. 2002 Complete update in accordance with hardware version 1.2 ACGM0151V1.2END Okt. 2002 Changed pictures of configuration examples on pages 9-14 to 9-16 ACGM0151V1.3EN...
  • Page 194 H France Panasonic Electric Works Sales Western Europe B. V. French Branch Office B.P. 44, F-91371 Verrières le Buisson CEDEX, France, Tél. 01 60 13 57 57, Fax 01 60 13 57 58, www.panasonic-electric-works.fr H Germany Panasonic Electric Works Deutschland GmbH Rudolf-Diesel-Ring 2, 83607 Holzkirchen, Germany, Tel.

This manual is also suitable for:

Fp-webFp-web2

Table of Contents