2.8.1 Automatic Route Selection (ARS)
[Programming Example]
Carrier Table
7
8
Carrier Name
Removed Number of Digits
9
Carrier Access Code
10
Trunk Group
11
Modify Command
12
CLIP Table No.
16
Note
•
If the ARS Itemised Code is set to be sent as a CLIP with ARS, the following settings are
prioritised and used as the CLIP.
8.2.1 Users—User's Device Settings—Device Settings—Option 1—ARS Itemised Code
•
CLIP Table No.1 is set automatically according to the following settings.
8.2.1 Users—User's Device Settings—Device Settings—CLIP—CLIP ID
6.
Optional Assignment
Authorisation Code for a Tenant
An Authorisation code can be assigned for each carrier and each tenant.
→ 16.5 PBX Configuration—[8-5] ARS—Carrier—16.5.3 PBX Configuration—[8-5-3] ARS—Carrier—
Authorisation Code for Tenant
Authorisation Code for a Trunk Group
An Authorisation code can be assigned for each trunk group and each carrier.
→ 16.7 PBX Configuration—[8-7] ARS—Authorisation Code for TRG
Itemised Billing Code
An Itemised Billing code can be assigned for each extension and for each verification code.
If a call is not made from an extension (e.g., DISA or TIE) and no verification code is used, the Itemised
Billing code assigned in the location 1 of the verification code will be used.
→ 8.2.1 Users—User's Device Settings—Device Settings—Option 1—ARS Itemised Code
→ 14.3 PBX Configuration—[6-3] Feature—Verification Code—Itemised Billing Code for ARS
122
Feature Manual
1
A telecom
B telecom
6
0
0077
0088
1, 2, 3
1, 2
CH#12
CH
2
1
[Example]
Dialled number: 0123456789
(Trunk Access no. is ignored.)
Modification:
012345 6789
0077 6789 #12
Remove 6 digits.
9
C
CLIP: 0234567861
16
13
14
15
Ext. 1001
2
CLIP No.
12
H
Add the number.
#12
Add the Carrier Access
code (
).
10
CLIP
1
0123456789
2
0234567861
3
0356894526
:
8
0856325889