→ 11.1.4 PBX Configuration—[3-1-4] Group—Trunk Group—Dialling Plan
–
the inter-digit timer expires.
→ 10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone—Dial—
Extension Inter-digit
•
Some supplementary services are provided by the key protocol (→ 4.1.2.11 ISDN Service Access by
Keypad Protocol).
•
Extension Number
An extension number can be assigned to each ISDN port.
→ 8.1.1 Users—User Container—Add User/Edit User—User Information—Extension Number
•
Network Type (BRI only)
Each BRI port can be set to the requirements of each country/area.
→ 9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port—Network—Network
Type
•
L1 Active Mode and L2 Data Link Mode (BRI only)
The active mode of Layer 1 (L1) and the data link mode of Layer 2 (L2) can be selected individually
(Permanent or Call by Call) on an ISDN port basis.
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port—Network
→ L1 Mode
→ L2 Mode
•
TEI Assignment Mode (BRI only)
The Terminal Endpoint Identifier (TEI) assignment mode can be selected on an ISDN port basis
→ 9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port—Network—TEI Mode
•
Bearer Mode
The bearer mode can be assigned on an extension basis.
→ 8.2.1 Users—User's Device Settings—Device Settings—Option 7—ISDN Bearer
•
Automatic ISDN Configuration
ISDN (BRI) port configuration can be set automatically through system programming.
→ 6.2 Tool—BRI Automatic Configuration
The following items will be set by making and receiving a call using the subscriber number assigned for
each ISDN (BRI) port:
–
L1 Active Mode
–
L2 Data Link Mode
–
Access Mode (Point-to-Point/Point-to-Multipoint)
–
TEI Assignment Mode (Fix 00–63/Automatic)
PC Programming Manual References
6.2 Tool—BRI Automatic Configuration
9.25 PBX Configuration—[1-1] Configuration—Slot—Card Property - BRI type/PRI type
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone—Dial—Extension
Inter-digit
10.9 PBX Configuration—[2-9] System—System Options—Option 2—ISDN en Bloc Dial—[#] as End of Dial
for en Bloc mode
8.1.1 Users—User Container—Add User/Edit User—User Information—Extension Number
8.2.1 Users—User's Device Settings—Device Settings—Option 7—ISDN Bearer
11.1.4.1 PBX Configuration—[3-1-4] Group—Trunk Group—Dialling Plan—Auto Assign
4.1.2 Integrated Services Digital Network (ISDN) Service Features
Feature Manual
317