Table of Contents
Advertisement
Conditions
•
KX-NSXU004 (Activation Key for Two-way Recording Control) is required to use this feature. One
activation key is required for each UM group (i.e., site) where a mailbox has been specified as the
recording destination for this feature.
•
Mailboxes specified as the recording destination become dedicated Automatic Two-way Recording
mailboxes. It is not possible to record messages to these mailboxes through other means, and
subscribers cannot log in to them.
•
Forwarded calls and calls retrieved from being on hold will also be automatically recorded. However,
conference calls will not be recorded.
•
Recording will automatically stop when the mailbox reaches its capacity. Delete older messages in order
to use this feature again.
•
If the enabled extension has a Two-way Record button assigned to it, the button will flash during
recording. However, that button cannot be used to cancel this feature.
•
An extension whose conversation is being recorded cannot be the target of the following features:
–
Executive Busy Override (→ 2.10.2 Executive Busy Override)
–
Whisper OHCA (→ 2.10.4.4 Whisper OHCA)
•
Automatic recording will not be performed when both the target extension and the other party are ISDN
extensions.
•
Conversations recorded with this feature are backed up via System Backup/Restore (→ 3.1.2.4 System
Backup/Restore).
PC Programming Manual References
7.10 Utility—Automatic Two-way Recording
8.6 Supervisors—Automatic Two-way Recording
8.2 Users—User's Device Settings—UM—Two-way Recording
Feature Manual References
5.4.4 E-mail Notification for Manager
3.2.1.5 Broadcasting Messages
Description
Allows the System Manager to deliver the same message to the mailboxes of all subscribers simultaneously.
Broadcast Messages have priority over other regular or urgent messages during playback, but otherwise are
treated like regular messages. They are not treated as "Urgent" messages; if "Only Urgent Messages" is
selected as the Notification Type in the Notification Schedule, the Message Waiting Notification is not
activated when a Broadcast Message is received.
Conditions
•
This feature is only available for the System Manager.
Operating Manual References
Manager Operation
2.2.1 System Manager Features—Broadcasting Messages
3.2.1 System Features
Feature Manual
271
Advertisement
Table of Contents
