5.4.3 E-mail Notification of Sensor Alarm
Event
System alarm
Software update
Conditions
•
To send e-mail notifications, the SMTP server settings must be configured.
•
The system name in the e-mail notification can be configured through system programming.
→ 28.3.3 Network Service—[3-3] Client Feature—SNMP Agent—MIB info—SysName
PC Programming Manual References
5.1 System Control—Program Update
7.7 Utility—Email Notification
8.1.1 Users—User Container—Add User/Edit User
28.2.5 Network Service—[2-7] Server Feature—SMTP
Feature Manual References
5.5.8 Software Upgrading
5.4.3 E-mail Notification of Sensor Alarm
Description
An e-mail can be sent to a specified e-mail address when the external sensor detects an alarm. You can put
comments in the e-mail. If you put a URL for the network camera in the comments, the recipient of the
notification can monitor the video feed from the network camera by clicking URL in the comments.
Conditions
•
Hardware Requirement:
An external sensor and a DOORPHONE card with Expansion Gateway. To connect an external sensor to
a legacy gateway (→ 5.3.1 Stacking Connection), refer to the documentation of the legacy gateway.
•
To send e-mail notifications for a sensor alarm, a DOORPHONE card must be installed.
•
A maximum 128 sensors can be connected to the PBX. An e-mail address can be set for each external
sensor.
•
For users to receive sensor alarm notifications, the following settings must be configured:
–
Notification e-mail for sensor alarm must be enabled
412
Feature Manual
An e-mail is sent to users registered as an administrator, and to up to
two additional e-mail addresses.
Reported alarm information includes the following
•
Error message which is detected by the KX-NSX main unit
•
Expiration notification of the AK maintenance (you will be notified 10
days before expiration)
Notifications can be sent for the following four types of software update
events:
1.
A software update has become available on the update FTP
server.
2.
A software update has been downloaded from the update FTP
server.
3.
A software update has been successfully installed.
4.
A software licence is about to expire.
Details