Table of Contents
Advertisement
2.17 Buffering or Transferring Images by Alarm
Signal
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
Notes
•
If you are recording images to the SD memory card, refresh interval slows
down.
•
You need to attach the alarm to this product when using this feature.
1.
Click [Trigger] on the Setup page.
2.
Click No. to enable buffer/transfer.
3.
Check [Enable Image Buffer/Transfer], select [Alarm] for trigger, select [Rising:
GND to Open (High).] or [Falling: Open (High) to GND.] and click [Next>].
Notes
•
If you click [Save], all buffered images on the SD memory card are
deleted.
•
Click [Delete Buffered Images] to delete this buffered images.
•
Click [Save] to save the settings.
•
Clicking [Cancel] takes you back to the Trigger page without saving
changes.
[For assistance, please call: 1-800-272-7033]
Operating Instructions
91
Advertisement
Table of Contents
