Table of Contents
Advertisement
■ Global Video Camera Control and Operation
● Global Camera Seize
Operators must seize a camera in order to perform camera operations. Following the steps in Global Video Switch
and Video Routing (refer to p. 8), you should be able to seize a camera 200001, which means a camera in domain 2
with a camera ID of 1.
● Camera Control
The system provides operators with camera control functions. The supported functions are: pan, tilt, zoom, focus,
and iris.
● Camera Operation
The system provides operators with the following camera operation functions:
• Camera menu control (analog switch node only)
• Camera preset call and programming
• Camera receiver control
■ Global Video Recorder Control and Operation
● Global Recorder Selection
Operators must seize a hard disk recorder and/or network disk recorder in order to perform recorder operations.
After Global Video Switch and Video Routing (refer to page 8), you can seize a recorder 200001, which means a
recorder in domain 2 with a recorder ID of 1.
● Recorder Basic Operation
The system provides operators with the following video recorder functions:
• Recording
• Playback, pause, and stop
• Fast-forward and rewind playback at different speeds (digital disk recorder only)
• Video input channel selection (digital disk recorder only)
• Multiscreen segment switching (digital disk recorder only)
Note:
• For the playback, there are restrictions below.
In the 6-screen, WJ-GXD400 does not support 4VGA (1 280 x 960) or more in the VGA screen.
In the 3-screen, WJ-GXD400 support up to 4VGA (1 280 x 960) in the large screen.
9
Advertisement
Table of Contents
