Table of Contents
Advertisement
Auto Image Adjust
Action
What can be done ?
The action function can be toggled between :
- full automatic
- on new file
- manual
[full automatic] : the best fitting file will be loaded automatically when a source is selected. At the same time the image will be
automatically centered on the active surface of the LCD.
The centering of the image will be disabled when :
1
The black edges of the image take more than 25% of the complete image.
2
The connected source is video, s-video, digital video or HDTV.
3
Custom file already exists.
[on new file] : only on a new file, the image will be centered on the active surface of the LCD.
[manual] : the auto image function is switched OFF, no centering, no file load.
Setup
To setup the Action function :
1
Push the cursor key é or ê to highlight 'ACTION' (image 1).
2
Press ENTER to toggle between FULL AUTOMATIC, ON NEW FILE and MANUAL.
The values of automatically adjusted sources will not be saved.
AUTO IMAGE
ADJUST
ACTION :
FULL AUTOMATIC
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
7-2
5976183 BARCOGRAPHICS 6500 31012001
Advertisement
Table of Contents
