Extron electronics IN1606 series User Manual page 88

To open a previously saved device list:
1. Click the
Open Device List...
2.
Navigate to the location of the saved device list file and select it.
3. Click the button. The
Open
NOTE: Valid files have a .mfst file extension.
To edit the communication settings of target devices in the device list:
NOTE: A firmware file is not loaded to a device if the TCP/IP information is invalid, the
target device is not connected, or the target device is not powered.
1. In the same row as the desired device, select the
2. Enter the new values in the appropriate fields (they are the same as in the
panel).
To remove a target device from the device list:
In the same row as the desired device, select the
Help
This option contains a link to the device help file.
From the drop-down menu, select device-specific
Device
separate window.
About This Module
This option contains the device module part number and firmware version of the connected
device.
1. From the drop-down menu, select
Device
dialog box opens.
Module
Figure 56. About This Module Dialog Box
2. Click the button to close the dialog box.
Close
IN1606 and IN1608 Series Scaling Presentation Switcher • Configuration Software
button ( ). The
5
Open Device List
window closes.
Open Device List
icon. The
icon.
About This Module...
window opens.
dialog box opens.
Edit
TCP/IP
. The help file opens in a
Help
. The
About This
82