Control Methods - Extron electronics IN1606 series User Manual

Control Methods

Control the scalers using one or more of the following methods:
•
•
•
•
•
The front panel controls and the on-screen display (OSD) menu (see
Display (OSD) Menu System
A computer, a touch screen panel, or any other device that sends and receives
serial communications through the USB, RS-232, or Ethernet port. Use the Extron
DataViewer utility on the connected device to enter SIS commands (see
Configuration and Control
Internal Web pages, providing a Web browser-based interface for controlling the
switcher from a computer over a LAN network (see
Ethernet control via IP Link (IN1608 IPCP only), enabling the switcher to be controlled
and actively monitored over a LAN, WAN, or the Internet.
NOTE: See the IPCP Pro Series User Guide at
options of the IPCP Pro 350 control processor.
The Extron Product Configuration Software (PCS) on a computer with a Windows
operating system (see Configuration Software
IN1606 and IN1608 Series Scaling Presentation Switcher • Introduction
on page 25).
on page 41).
Internal Web Pages
www.extron.com
on page 65).
On-Screen
SIS
on page 83).
for control
®
10