Device Settings Page - Extron electronics IN1606 series User Manual

To clear a preset:
1. Select the input preset or user preset (see
2.
Click the
confirmation dialog box opens.
3. Click the
Preset Management
To rename a preset:
1. Double-click a
select
2. Enter a new preset name and press the <Enter> key.

Device Settings Page

The
Device Settings
modes, HDCP notifications, video and sync muting, on-screen display timeout, and HDCP
modes. Click the
Navigation Bar
Figure 80.
Screen Saver panel
When no active video is detected on the selected input, the screen saver mode is activated.
The output sync can be disabled after a user-set duration, which allows display devices to
go into a low power, standby state.
1. Click one of the radio buttons (see figure 80,
saver is enabled.
• Black
sync (default).
• Blue with On Screen Display (OSD) Bug
a moving OSD message that indicates "<
Signal
IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages
figure
button (see
Clear
button to erase saved data or click the
Clear
page.
or right-click a
Preset Name
.
Rename
page allows configuration of screen saver settings, auto switch
icon (see
Device Settings
to open the
Device Settings
Device Settings Page
— Mutes video output to black for a set duration before disabling output
" for a set duration before disabling the output sync.
figure 79, on page 112) to be cleared.
1
79,
) located in the same section of the screen. A
4
Cancel
(see
Preset Name
figure 58, on page 86) on the
8
page.
) to select a display when the screen
1
— Displays a blue background with
>
scaler model : Input
button to return to the
figure 79, ) and
1
Global
< >
number No
113