Extron electronics IN1606 series User Manual page 85

4. Add target devices to the Device List in any of the following ways:
In the panel (see
•
TCP/IP
information for the target device in the
and click the button.
Add
NOTE: A configuration is not loaded to a device if the TCP/IP information is
invalid, the target device is not connected, or the target device is not powered.
Click the
• Open Device List...
window and navigate to the location of a saved device list file. Select the desired file
and click the
Open
5. In the left column of the Device List, select the check boxes of the desired devices to
restore the saved configuration file.
6. Click the button (
Restore
To save the current list of target devices:
1.
Click the
Save Device List...
2. Navigate to the desired save location.
3. Click the button. The
Save
To open a previously saved device list:
1. Click the
Open Device List...
2. Navigate to the location of the saved device list file and select it.
3. Click the button. The
Open
NOTE: Valid files have a .mfst file extension.
To edit the communication settings of target devices in the device list:
NOTE: A configuration is not loaded to a device if the TCP/IP information is invalid, the
target device is not connected, or the target device is not powered.
1.
In the same row as the desired device, select the
2. Enter the new values in the appropriate fields (they are the same as in the
panel).
To remove a target device from the device list:
In the same row as the desired device, select the
IN1606 and IN1608 Series Scaling Presentation Switcher • Configuration Software
figure 52, on page 78), enter the necessary
2
IP Address
button ( ) to open the
5
button to load the list of devices.
) to load the file to the selected devices.
6
button ( ). The
4
window closes.
Save Device List
button ( ). The
5
window closes.
Open Device List
icon.
, , and
Password Telnet
Open Device List
window opens.
Save Device List
window opens.
Open Device List
icon. The Edit dialog box opens.
TCP/IP
fields
79