Appendix B: Disabling The Pwm Voltage In Ibuilder; Figure 61. Ibuilder Remote Information Tab: Disabling Tx Pwm - iDirect evolution x1 Installation Manual

Appendix B: Disabling the
PWM Voltage in iBuilder
The PWM voltage normally present on the TX Out port during antenna pointing may be
disabled from within iBuilder.
To Disable the PWM Voltage:
1. Apply power to the Satellite Router and allow it to initialize.
2. In iBuilder, right-click the remote and select Modify
The Remote Information tab opens.
iDirect Satellite Router Installation and Commissioning Guide
iDX Release 3.3

Figure 61. iBuilder Remote Information Tab: Disabling Tx PWM


Item.
111