Retrieving The Ip Address; Figure 11. Entering The Laninfo Command - iDirect evolution x1 Installation Manual

Retrieving the IP Address using the Console Port

3.3.3 Retrieving the IP Address

After logging in to the iDirect Application program, retrieve the IP address and subnet mask.
To display the IP address and Subnet Mask:
1. At the command line prompt, enter laninfo (Figure 11).
Figure 11. Entering the Command
laninfo
displays the current IP Address and net mask of the Satellite Router. In Figure 11,
laninfo
the IP address is 10.111.22.1, and the subnet mask is 255.255.255.0 Use this information to
.
configure the local PC when connecting to the Satellite Router via the LAN port. See "Local
Area Connection" on page 14.
20 iDirect Satellite Router Installation and Commissioning Guide
iDX Release 3.3