Pc Firewall - iDirect evolution x1 Installation Manual

PC Firewall

• The Evolution X1 and e150 image files (Remote_Evolution_X1_e150 folder)
• The Evolution X7 image file (Remote_Evolution_X7 folder)
1.7 PC Firewall
When using Windows XP and Windows 7 with iSite version 3.1 and above, it is necessary to
disable or modify the Windows Firewall for full functionality of some features.
For Windows 7, because the Firewall may be selectively applied to separate domains, iDirect
recommends that the Firewall remain enabled, but that the iSite application be granted
access as an allowed application. Refer to
To Configure Windows 7 Firewall for iSite:
1. Open the Control Panel and click Windows Firewall.
2. In the left-hand viewing pane, select Advanced Settings. A new window opens.
3. In the left-hand pane of the Windows Firewall with Advanced Security window, click
Inbound Rules.
4. Scroll to iSite in the center viewing pane. Right-click and select Properties.
5. In the General tab under Action, select Allow the connection.
6. Click OK.
7. Repeat for other instances of iSite in the scroll-down list.
8. Close Firewall windows.
4
Figure 1 for the following procedure:
iDirect Satellite Router Installation and Commissioning Guide
iDX Release 3.3