Local Area Connection; Figure 4. Local Area Connection Status Dialog Box - iDirect evolution x1 Installation Manual

Local Area Connection

3.2 Local Area Connection
To connect using the LAN port, the local PC must be in the same subnet as the Satellite
Router. This is done by modifying the TCP properties of the Local Area Connection on the local
PC. The following section uses the Windows 7 operating system to illustrate the procedure.
To modify the Local Area Connection:
1. In Control Panel, click Network Sharing Center.
2. Double-click Local Area Connection to display the Status dialog box.
14

Figure 4. Local Area Connection Status Dialog Box

iDirect Satellite Router Installation and Commissioning Guide
iDX Release 3.3