Figure 38. Restart Confirmation Box - iDirect evolution x1 Installation Manual

Loading Options Files with Web iSite
3. At the bottom of the page under Configuration From File, click Browse.
4. Navigate to the location on the local PC where the .json file is located.
5. Select the Downstream Template file by double-clicking the filename or clicking Open.
6. Under Configuration From File, click Apply.
7. The data fields in the Downlink, LNB, and Package Multicast sections update with the
information in the Downstream Template file.
8. Confirm that the displayed data is correct.
9. In the top navigation bar in Web iSite, click the Admin button.
10. In the Restart Device section of the File Management page, click Restart.
11. In the Restart confirmation box
and loads the new configuration.
Note: Restarting forces Web iSite to log out of the Satellite Router. Log in again using
the default IP address and password.
After loading the Downstream Template and restarting the Satellite Router, proceed to
"Pointing the Antenna with Web iSite" on page
Network Operator can use iBuilder to push the software package and the remote-side options
file.
58
(Figure 38), click Restart. The Satellite Router restarts

Figure 38. Restart Confirmation Box

59. Once the antenna is correctly pointed, the
iDirect Satellite Router Installation and Commissioning Guide
iDX Release 3.3