Appendix A: Loading Images With Tftp Server - iDirect evolution x1 Installation Manual

Appendix A: Loading
Images with TFTP Server
An alternate method of downloading the images to the Satellite Router is to use the TFTP
server that comes bundled with iSite.
Note: This appendix is not applicable to Evolution X1, X7, or e150 Satellite Routers.
1. Open iSite and select TFTP from the File menu.
2. Select the TFTP server local folder in the pop-up window. Browse and select the folder in
which the remote package resides.
3. Telnet to the Satellite Router or open a console session using the procedure
to the Console Port" on
4. Log in as root.
5. Enter
service idirect_falcon
6. Enter
tftp_package.sh <IP address of TFTP server> <package
For example, if your laptop's IP address is 10.10.1.2 and you are loading 9.0.0.4 remote
package the command will be
7. Once the transfer is complete, reset the remote using the
iDirect Satellite Router Installation and Commissioning Guide
iDX Release 3.3
page 17.
stop. This will stop the iDirect application.
tftp_package.sh 10.10.1.2 remote
"Connecting
name>.
9_0_0_4.pkg.
command.
reboot
109