5. Enter the remote site latitude and longitude in the appropriate data entry fields using
decimal notation.
Note: The numerical data may be typed into the fields, or modified by clicking
the arrow buttons.
6. Select degrees of North or South latitude, and East or West longitude.
7. After entering the correct information, click Set Location.
CAUTION:
8. Click the Admin button at the top of the Web page.
9. Restart the Satellite Router by clicking Restart on the File Management page.
After setting geographic location, continue with the procedures in
page 79.
iDirect Satellite Router Installation and Commissioning Guide
iDX Release 3.3
Figure 45. Setting Geographic Location: Evolution X7
Double-check the geographic coordinates before clicking Set Location.
Setting Geographic Location of an X7
"Cross Polarization" on
77