Initiating Traffic Flow - iDirect evolution x1 Installation Manual

Initiating Traffic Flow

3. Scroll down as needed to view and record the following data on the Modem Status page:
a. Temperature (under Modem State)
b. Rx Composite Power (under Rx State)
c. Rx SNR (under Rx State)
d. Tx Power (under Tx State)
4. Report the readings to the Network Operator, and save locally for future reference.
18.3 Initiating Traffic Flow
Following completion of the procedures in this and previous chapters, the Satellite Router is
ready to carry user traffic. If the IP connections to the LAN port(s) have not been made, do so
now. Test the circuit by initiating IP traffic over the LAN.
Testing of IP throughput is not generally considered a commissioning activity, and is beyond
the scope of this guide. Refer to the iDX Technical Reference Guide for information about IP
throughput scenarios.
108 iDirect Satellite Router Installation and Commissioning Guide
iDX Release 3.3