One Touch Parameters - Oki OKIOFFICE 84 User Handbook Manual

7 Enter the Location ID. This is a descriptive title up to 15
characters long. Refer to the instructions below.
To Do This
Enter numbers
Enter spaces
Enter Hyphens (-)
Enter alphabet characters
Enter a unique character
Enter two letters using the
same key.
Move the cursor to make
corrections.
|
40 Handbook
Use
Numeric keypad (press once)
Space One Touch key
Hyphen key
Locate the character you
want on thenumeric keypad.
Press that key repeatedly
until the desired character
appears.
Press the 0/Unique key
repeatedly until the
character you want appears.
The following characters are
available: ! # & ' ( ) * +
, - . / : ; = ? ä ß ñ ö ü Æ
Å Ø æ å ø.
Press the No key to
move to the next position.
Press the Yes and No
keys.
8 Press the Start key. The display shows NO=<OR
LOCATION>.
9 Enter the alternate fax number. Refer to the instructions
following Step 5.
10 Press the Start key to finish programming the One Touch
key. The display shows LOCATION PROGRAMMING.
11 To continue programming One Touch keys, go back to
Step 3. If you are finished programming, press the Select
Function key.
12 Lift off the plastic cover above the One Touch label.
Using a pencil, write in the name for your newly-
programmed One Touch key. Then replace the cover.

One Touch Parameters

If you are experiencing problems communicating with a
remote location in a very noisy telephone area, or an overseas
location, set up a One Touch key for that location and try
turning Echo Protection on for that One Touch key.
1 Press the Select Function key.
2 Press the 9/User Program One Touch key. The display
shows 1:FUNC. PROGRAMMING.
key. The display will show FUNCTION
3 Press the Yes
NO. [ ].