Restricted Access; Dual Access - Oki OKIOFFICE 84 User Handbook Manual

Limit both transmission and reception (T/R)
No limitations on transmission or reception (OFF)
To use the closed network function, follow the instructions
below.
1 Press the Select Function key.
2 Press the 9/User Program One Touch key. The display
shows 1:FUNC.PROGRAMMING.
key. The display shows FUNCTION No. [ ].
3 Press the Yes
4 Using the numeric keypad, enter 08. The display shows
08:CLOSED NETWORK, and the current setting of this
function.
5 Press the No key until the setting you want appears in
the display.
6 Press the Yes key to confirm the new setting.
7 Press the Select Function key to finish.

Restricted Access

Restricted Access limits your MFP's accessibility. Only by
entering a password can the user have access to the machine.
To set this feature:
1 Press the Select Function key.
2 Press the 9/User Program One Touch key. The display
shows 1:FUNC.PROGRAMMING.
|
56 Handbook
3 On the numeric keypad, press 7. The display shows
7:RESTRICT ID PRG.
key. The display shows DEPARTMENT
4 Press the Yes
NO. [ ]
5 On the numeric keypad, enter a Department number
(from 01-24). The display shows ENTER ID [ ].
6 On the numeric keypad, enter a four-digit ID number.
7 Press the Yes key to set up your Restrict ID.
!
Be sure to keep a memo of your registered password.

Dual Access

Your MFP's dual access feature allows you to load and
prepare to transmit a document while your MFP is receiving
or sending another fax from memory. This feature increases
your productivity and reduces the time you spend waiting for
other operations to finish. Once you have loaded a document
and the display shows SELECT LOCATION, your MFP is
ready for you to load the next transmission.