Setting Your Mfp's Distinctive Ring; Dial Parameter Settings; Dial Parameter Settings List - Oki OKIOFFICE 84 User Handbook Manual

Setting Your MFP's Distinctive Ring

1 Press the Select Function key.
2 Press the 9/User Program One Touch key. The display
shows 1:FUNC. PROGRAMMING.
key. The display shows FUNCTION NO. [ ].
3 Press the Yes
4 Using the numeric keypad, enter 12. The display shows
DISTINCTIVE RING, OFF.
5 Press the No key. The display will change to
DISTINCTIVE RING, SET.
key. The display changes to SETUP FAX
6 Press the Yes
RING, CALL FAX NUMBER NOW.
7 Using a separate telephone line, immediately dial the
number assigned to the MFP (you must do this within 90
seconds). When your MFP begins to ring, your MFP
automatically detects and remembers its assigned ring
pattern. When your MFP has finished programming its
ring pattern, the display show RESULT=OK.
!
Occasionally, your MFP may not be able to detect its
ring pattern on the first try. If this happens, the display
will show RESULT=NG. Follow the instructions again
from Step 6.
8 Press the Yes key to confirm your selection.
9 Press the Select Function key to finish.
|
64 Handbook

Dial Parameter Settings

These functions allow you to control the way your MFP dials
telephone numbers. Refer to Dial Parameter Settings List to
determine which settings you may need to change, then refer
to Changing Your Dial Parameter Settings to make the
change.
Note: The Factory Default setting is in bold italics.
!
Some settings are not available in some countries. If
you have trouble accessing a dial parameter setting
listed here, contact your dealer for assistance.

Dial Parameter Settings List

REDIAL TRIES: This function controls how many times
your MFP will automatically redial a number that is busy or
which does not answer. Available settings are from 0 to 10
tries. Default setting is 3 tries.
REDIAL INTERVAL: The function controls how long your
MFP waits between each automatic redial attempt. Available
settings are from 1 to 6 minutes. Default setting is 3 minutes
between dialing attempts.
DIAL TONE DETECT: This function allows your MFP to
wait for and detect a dial tone before proceeding with
dialing. Available settings are on and off.