Programming Your Auto Dial Directory - Oki OKIOFFICE 84 User Handbook Manual

Programming Your
Auto Dial Directory
Overview
Your MFP has 70 Auto Dial numbers available for quick, two-
digit selection and dialing. For each auto dial number, you
can enter a fax number up to 32 digits long and a Location ID
(name) up to 15 characters long.
To program Auto Dial numbers:
1 Press the Select Function key.
2 Press the 8/Location Program One Touch key. The
Display shows LOCATION PROGRAMMING.
3 Press the Auto Dial key.
4 Using the numeric keypad, enter a 2-digit number (01-
70) for the Auto Dial number you want to program.
The display briefly shows NO=<FAX NO.>,
5
ID=<LOCATION ID>
(or a previously programmed fax number and location).
6 After the display clears, enter the fax number. Refer to
the instructions below.
To Do This
Enter numbers
Enter spaces
Enter Hyphens (-)
Enter pauses (i.e., to wait for
long distance or outside lines)
Add a switch from pulse to
tone dialing for part of the call
Move the cursor or make
corrections
7 Press the Start key.
8 Enter the Location ID. This is a descriptive title up to 15
characters long. Refer to the instructions below.
To Do This
Enter numbers
Enter spaces
Enter Hyphens (-)
Enter alphabet characters
Use
Numeric keypad (press once)
Space One Touch key
Hyphen key
Pause key
*/Tone key
Yes and No keys
Use
Numeric keypad (press once)
Space One Touch key
Hyphen key
Locate the character you
want on thenumeric keypad.
Press that key repeatedly
until the desired character
appears.
Handbook
|
43