Locating Unassigned One Touch Or Auto Dial Numbers41; Chain Dialing - Oki OKIOFFICE 84 User Handbook Manual

4 Using the numeric keypad, enter 28. The display shows
28:ONE TOUCH PARAM.
5 Press the One Touch key for the location whose settings
you want to change. The display shows ECHO
PROTECTION, [OFF].
6 Press the No key to switch Echo Protection on.
7 Press the Yes key to confirm your selection. The
display shows FAX SPEED, [14.4k].
!
You may want to try lowering this location's fax speed
to 9.6k or 4.8k if you continue to have communication
problems.
8 Press the No key until the selection you want appears
on the display.
9 Press the Yes key to confirm your selection. The
display shows 2:ONE TOUCH PARAM. [ ].
10 Press the Select Function key to finish.
!
Switch Echo Protection back off if you later change the
location the One Touch key is used for as this setting
increases the time to connect.
Locating Unassigned One Touch or Auto
Dial Numbers
You can also use the Search key to search for unassigned One
Touch keys and Auto Dial numbers.
1 Press the Select Function key
2 Press the 9/Location Prog One Touch key. The display
shows LOCATION PROGRAMMING ENTER
(SRCH,OT,A/D,#)
3 Press the Search key
4 The display shows the next unassigned One Touch key
or Auto Dial number.

Chain Dialing

Each fax number that you enter or program into your MFP
can be up to 32 digits long. If you need to dial a number
which is longer than 32 digits, use the chain dial feature.
To create a chain dial number:
1 Program the first 31 digits of the number into a One
Touch key or Auto Dial number.
2 Press the 8/+ One Touch key.
3 Program the rest of the number into another One Touch
key or Auto Dial number (or, you can leave the second
|
Handbook 41