Sending A Fax To A Single Location - Oki OKIOFFICE 84 User Handbook Manual

3 Your MFP grips the documents, and pulls the bottom page
into the machine.
If necessary, use the Transmit Resolution or Yes
set the resolution of your document.
Document Type Resolution
To Use of Scan
Normal office STD (Standard)
documents
Documents with small FINE or EX.FINE
type or other fine details
Documents with photos PHOTO
or many shades of gray
4 If necessary, use the Type of Original/No
level of contrast in your document.
Document Type
Documents with normal contrast
(default setting)
Documents that are too light
Documents that are too dark
5 Your Documents are now ready for faxing or copying.

Sending a Fax to a Single Location

1 Load your documents.
key to
2 Select a location. Refer to the instructions below.
Resolution To Dial Using
A One Touch key
200 x 100 dpi
An Auto Dial number
FINE: 200 x 200 dpi
EX. FINE 200 x 400 dpi
The numeric keypad
300 x 300 dpi
key to set the
An external telephone
Contrast to Use
NORMAL
LIGHT
DARK
3 If necessary, press the Start key to begin the transmission.
Do This
Press the One Touch key.
Press the Auto Dial key, then enter
the two digit Auto Dial numbers
on the numeric keypad.
Dial as you would on a normal
telephone. If you make a mistake,
press theYes key back up one
space and re-enter the number.
Pick up the handset of your
external telephone and dial the
number of the machine you wish
to transmit to. If the receiving fax
machine is in automatic reception
mode, you will hear a high-pitched
tone. If a person answers the
phone, ask them to press the Start
key on their fax machine.
Handbook
|
33