Oki OKIOFFICE 84 User Handbook Manual page 49

part of the number unprogrammed and enter it manually
on the numeric keypad).
To use a chain dial number:
1 Select the One Touch key or Auto Dial number
programmed with the first part of the chain dial number.
The display shows: PRESS OT/AD/SRCH KEY.
2 Select the One Touch key or Auto Dial number
programmed with the second part of the chain dial
number. If the second part of the chain dial number was
not programmed, enter it manually on the numeric
keypad.
3 Press the Start key to begin sending the fax.
|
42 Handbook