Table of Contents
Advertisement
Configuration Printout
The configuration printout lists all of the currently selected configuration parameter values. A
sample configuration printout is shown in Figure 3-1.
The following general procedure can be used to obtain a configuration printout. Refer to the
Control Panel Switch Function Diagram for an illustration of the switches required to select
and display the parameter menus and values.
1.
Verify the POWER indicator is lit and the printer is off line.
2.
Repeatedly press CONFIG MENU until DIAGNOSTICS is displayed.
3.
Press CONFIG VALUE; select and display the CONFIGURATION PRINTOUT menu.
4.
Press RUN/STOP TEST. The configuration printout will be produced.
5.
Press RUN/STOP TEST again to return to OFFLINE READY.
3-6
Configuration
Advertisement
Table of Contents
