Configuration Printout; Sample Configuration Printout - Printronix 9012 User's Reference Manual

CONFIGURATION PRINTOUT

The configuration printout lists all of the currently selected configuration parameter val
ues. A sample configuration printout is shown in Figure 3-1.
The following general procedure can be used to obtain a configuration printout. Refer to
the Control Panel Configuration Diagram for an illustration of the switches required to
select and display the parameter menus and values. When this mode is exited, the previ
ous print mode and LPI is restored, and all print attributes are cancelled. All other for
mat parameters are unaffected.
1. Place the printer off line.
2. Select and display the CONFIGURATION PRINTOUT menu in the DIAGNOS
TICS menu.
3. Press RUN/STOP. The configuration printout will be produced.
4. Press CLEAR to return to OFFLINE READY.
5. Place the printer on line.
3-4
Figure 3-1. Sample Configuration Printout
P9012 Configuration