Printronix P6000L User's Reference Manual page 178

The RibbonMinder feature will detect when no usable ink remains. The message display will
indicate 0% and the printer will alert the operator. At this point, the printer is typically config
ured to stop printing, declare a RIBBON FAULT, and inform the operator to CHANGE RIB
BON.
Finally, the RibbonMinder allows the operator to set a new JOB RATE value to the next job.
This value is based on the type of job to be run by the printer. The RibbonMinder also provides
an ANALYZE JOB mode which allows the operator to easily calibrate the RibbonMinder for
each job that the printer will run, in order to establish the value of the JOB RATE.
9-2
FAULT CONDITION
CHANGE RIBBON
CURRENT 350
NEW RATE 450
ON LINE 425A
*
DP AT 10 CPI
CHANGE RIBBON message at 0%
SET JOB RATE menu
ANALYZE JOB RATE display
RibbonMinder