Table of Contents
Advertisement
Cleaning the Paper Motion Detector
The paper motion detector, located at the bottom of the left tractor gate, checks for jammed or
misloaded paper. If excessive chaff or dust accumulates in this area, normal operation may be
interrupted.
To clean the paper motion detector, perform the following steps and refer to Figure 8-2.
1.
Open the left tractor gate (A).
2.
Clear the paper chaff and dust from the paper motion detector (B) with a soft-bristled
brush.
3.
Close the tractor gate.
After all cleaning is completed, reload paper and ribbon, return the Forms Thickness Adjust
ment Lever to the appropriate position, reconnect the power, and turn the printer on.
Maintenance
Figure 8-2. Cleaning the Paper Motion Detector
8-3
Advertisement
Table of Contents
