Table of Contents
Advertisement
Floor Cabinet Model Installation
The following section on Floor Cabinet Model Installation provides information on installing
the paper stacking chain assembly and removing the shipping restraints for the P6200L Series
printers.
Paper Stacking Chain Assembly Installation
The Paper Stacking Chain Assembly is an aid used on floor cabinet model printers for proper
paper stacking. To install the Chain Assembly, refer to the following instructions and
Figure 10-3.
1.
If paper is loaded in the printer, unload the paper.
2.
Open the printer rear door to access the paper stacking area.
3.
Hook the bottom of the four (4) long chains to their own rings to form a loop. The long
chains must be looped for proper operation.
Installation
Figure 10-2. Site Requirements - Pedestal Model
10-3
Advertisement
Table of Contents
